Search results

Hi mattc, it could be the bushes on the anti roll bar are worn

Car over heated when I got to MOT station in Eastleigh council MOT centre, would not start, even when it cooled down, discovered fan has not been running, but this happened a few minutes after i got there, any idea what caused this.

Buy a can of PTFE spray and spray everything that needs it

Has anyone come across HVO alternative diesel fuel, I have read an article on the official MB web site, very interesting reading

Thanks AMGeed, I have seen the video before, I have come to the conclusion that that there is no procedure for releasing the hydraulic pressure for the break shoes from the steering wheel control from the dash, just keep the ignition key out of the ignition switch.

My apologies, did not mean to be impolite

Procedure for disabling electronic parking mode for replacing break shoes on a 2007 S320 W221

It has to be someone who has an F gas qualification to handle anything to do with air conditioning

Michelin sports 4 are the ones to go for

Hi killerHertz, I popped into a indie to have my AC regassed, and i noticed he was using a " Launch" code reader, have you come across this code reader ??

The oil level is spot on, but suddenly loose the power steering, any ideas as to what is causing it.

there is two filler settings, when cold, set to the 20 centigrade mark, when hot to the 80c mark, if one overfills, use a syringe to remove the oil.

I have asked for one at Mercedes in Poole, and they tell me on my W221 S class 2007, it does not have a stop light break switch

they should both be able to unplug them

Just read the article written by "sceh" regarding contact issues with wheel sensor's. or rather the connecters behind the wheel arch screen which is probably a contact which needs cleaning and sprayed with contact cleaner, with a bit of luck, which i hope will solve the problem, had this issue...

I keep getting a intermittent fault coming up on my screen saying abs & esp are inoperative, plus my cruise control and hold function are no longer operative, where should I be looking to see where the fault incoming from. thanks for any help

had the same problem last year just before I went to Italy, had to have a new turbo to fix the problem, ouch.

If you register with Haynes web site for a fee, with your car model, it will give you all the torque specification on what ever project you will be working on

Thankyou for that AMGeed, I see it shows vented discs, mine are solid, now I see the break adjuster, will have another go at adjusting them

I was looking my rear brake disc's on my 2007 S class W221 to adjust my break shoes, and I've come to a conclusion it does not have any break shoes to adjust, I have a problem with my electronic break lever showing that is inoperative on my dash, so checked the rear breaks to find no shoes to...