Search results

Hi how did you remove the white actuator from where it is fitted,mine hisses but i was worried that i would break as i could not see how this comes apart.Does the link rod stay in situ,any info or picture would be appreciated.regards.

Update finally changed rear bearing in situ on car,used a two piece bearing pull to break out the hub by placing behind and using wheel bolts to jack out increasing the movement with metal shims,although this ruined the brake back plate,screw jacked the wheel bearing out and in,found a you tube...

Hi,looking for drawing or info on how to replace the white plastic air driven actuator for the tailgate lock. Actuator hissing untill lock opens or closes seems to cause lag for filler flap motions. Trying to resolve headlamp levelling which is not working.

Hi thanks for info coalville,removed tailgate cover and found air supply to lock hissing which created a lag in opening filler flap,once filler flap open hissing stops. Will this be the cause of headlamp levelling not working. Lubricated all parts on lock but lock will not turn with key. Anyone...

no,it was from the scrapyard which i removed,unable to try insitu car had no battery or compressor. The hissing on mine is only from the thumbwheel,you have to put your ear next to. The replacement thumb wheel is hissing exactly like the original,so i seem to think that is normal like an exhaust...

Hi I have the same problem and the hissing you describe. I changed the levelling wheel switch but this did not cure,also lights seem to have dipped below normal low level. I noticed this a couple of weeks after an MOT and wonder if adjustment was done to the beam height that has somehow broken...

Pipes can be bought seperately with o rings fitted from MB,o rings kits are available on ebay made from viton which is remarked as being longer lasting than the original rubber.I replaced all of mine, as i was of the opinion that one was leaking than others were sure to be in a similar...

Thanks for all replies,running engine with manifold removed will be tried to keep hot.

johnsco i have the o ring part number it is A 606 997 06 45 ,this was bought at MB for my 1998 E300 TD estate,still to be fitted when i change glowplugs

Recently replaced all 4 alloy wheels on my S210 with steel wheels and tyres.Sick of having to keep inflating them on a weekly basis because they were losing pressure. Local garage buffed inside the wheel to try and cure,leak did not show in a tank of water,put down to slight ovaling creating...

Thanks for reply,me thinks the inlet manifold will have to be removed to access,have you changed these with the engine idling on a W210,i dont think my tools would access with the manifold still fitted.

I have paid this in the past,thought i would do myself this time and have the drill out kit available,i am a confident DIYer who can tackle most mechanical work on a car. Thanks for reply,glow plug light stops on longer than usual and car lumpy when cold starting. MB dealers should change these...

Anybody used the kits for drilling out seized glowplugs that are advertised on ebay for about £100,i have been charged £50 a plug to remove,which mercedes contracted out to a specialist to do the work.

Thanks,whats your opinion on using a slide hammer bolted to the hub to break out the hub from the inner bearing race with the bearing carrier in place,i believe i can remove and replace the bearings using a screwed bar to jack out and in once the hub is removed with bosses of similar diameter to...

Does anyone have the tooling to hire to remove and renew the rear bearings in situ on the car,ie without removing the the bearing carrier,i am having problem with removing the the wheel hub thats pressed into the inner bearing race.Not to keen on removing all the suspension arms,plenty of posts...

W210 Front springs Just had both front springs and new cups welded by independant,price was £620 which also included a towing fee,welding looks superb and i am pleased with the work and to have car back on the road. What do you all think of price.

Thanks for info,removed wheel yesterday to have a look,support perch in place but welded side fillets hanging by a thread of rusted metal,my spring appears to have had a old break which was inside cup/perch,i can tell by the heavy rust,final break in spring lower down around 4th coil which...

Thanks for interest Black C55 although not in your region,up north in Cumbria

Hi, Braked at a roundabout and heard the big bang,stopped and looked behind to find front nearside spring in three pieces on the road. Managed to drive home 20 miles albeit at slow speed. Can anyone give advice on repair and good after market part supplier,i have not had the chance to remove...

Hi all , what type of fluid/oil do you use to top up the self levelling suspension reservoir on a 1998 E300 turbo diesel estate.Noticed a leak from the levelling valve and the level indicator on the reservoir is reading minimum.This appears the symptom of repairs carried out a month ago by...