Search results

  1. jhorn

    W221 S Class - Removing driver side headlight

    just front bumper off and you are ready to go
  2. jhorn

    MB W221 boot mechanism problem

    W221 boot mechanism problem I have uploaded picture of the boot wires. as you can see 3 wires already cracked
  3. jhorn

    MB W221 boot mechanism problem

    W221 boot mechanism problem no not really ! the cables are long enough the problem is only the factory tights I have given solution in next post I have decided to write here as there is not much information about the MB W221 anywhere as MB is keeping their secrets and most of the owners...
  4. jhorn

    MB W221 boot mechanism problem

    W221 boot mechanism problem what need to be done is removal of the factory tights ,welding the broken cables covering all in protective soft tape and let it loose or put the tights with some looseness , not like they do them in factory. To check it - open the boot fully and make sure wires...
  5. jhorn

    Merc CLK 270cdi black smoke

    problem Go to MB or MB specialist and spend 40-80 quid for the diagnose . they should give you error print outs with the code you can ask here on the forum it could be Egr , to much air in the mixture, turbo, inter cooler split or few more spend the money on diagnose to avoid changing...
  6. jhorn

    MB W221 boot mechanism problem

    Hi All I have sorted my S class W221 boot mechanism problem. It was not closing correctly. I had to press handle and mechanism was clicking and clicking untill getting in to position to close it . MB said of course to change the locking mechanism .... about £500. Though I can live with my...
  7. jhorn

    3.0 litre CDI Power loss.

    Limp mode fixed ! very small clean up did the mirracle Found the problem!!!. Went to MB specialist who after checking on StarD parameters said initally it will be EGR but when told him I have checked it by putinig EGR from other car He pointed out on Small metal pipe in engine front which...
  8. jhorn

    3.0 litre CDI Power loss.

    Limp mode but its not EGR valve The problem came back! My neigbour have the same MB so we have swap the egr valves today but , after driving the car I have experienced same problems so it is not egr any one knows what can cause it ? taking in consideration the fault code stated below?
  9. jhorn

    3.0 litre CDI Power loss.

    I had same problem like yours in my S320 CDI 2007 (105k miles) W221 Mercedes . MB tested and got a fault No 2385-002 "Check system Exhaust recirculation control. Air mass to large ". Also have tested on some different OBD computer and was showing the same fault " air mass to large" MB...
Back
Top Bottom