1984

Hi Guy's, can you give me some pointers on what to look out for on a 1984 280 SL. Is there anything in particular that trouble these ? All help appreciated :thumb:

Thought I'd introduce my 1984 190E, 2.0 auto, 35k miles, I'm the second owner from new. One of the early W201's without the side repeaters and with a single wiper arm but with a small additional blade as part of it. And one from before Christmas...

I need a new front right brake caliper for my 1984 2.0E, but which type do i need? The local motor factors started asking me questions about vented or non-vented, piston diameter, and is it a fist-type caliper, a 2 piston caliper and such like. Can someone advise me which I need? Chassis number...

-part number 0225450114 throttle sensor -fuel pump -fuel pump relay carl 07985-421472 [email protected]

Hi, I am having problems with the automatic transmission on my 230ce w123 saloon, When driving the gears do not change for quite a while, It's like it is stuck in first gear then all of a sudden it will change down and go into 3rd gear, Can anybody help or know of a good place to take it, I am...

Hi, I am looking for a white wheel hup, Thank You Mercedes 230e 1984 w123

"Today's published Commons order papers contain a question to be answered by a minister later this week. The Guardian is prevented from identifying the MP who has asked the question, what the question is, which minister might answer it, or where the question is to be found. The Guardian is...

I'm having problems replacing the c.v. boots. I've dropped the half shaft from the hub with no probs but now i can't get the other end out the diff, or remove the c.v. from hub end to slide on new boots. do i have to open diff? if so i have to remove self leveling system and fuel tank to get at...

Cheers from the other side of the pond, not sure if i posted in the correct place but i need a manual for a 1984 280se w126 ( six cylinder ) euro version, this is considered a grey market car here in the states and i'm having trouble locating a repair manual. Any links to available book...

Just had my badge nicked :mad:, Anyone know where i can find a replacement? It is for the one on the front , Thank You

Hi All My Brother in law has finally seen sense and is thinking about buying an older MB as a summer / weekend car. He is in the trade working as a vehicle technician so checking it out physically is not a problem. Anyway he has been offered the car below. Apparently the guy has said...

Very rare AMG brochure with sections for Technical Modifications(engine, bodywork wheels etc) and Interiors. Contents for one section Front cover of another From Interior Mods 190 Engine Mods Looking for £20 posted

Looking for a front bumper for a 230CE B reg 1984

My mate Ray has made me an offer I find very hard to resist. I would like to sell the Porsche so that it will finance the purchase of Ray's E320 Coupe. I prefer not to go public with prices etc but if anyone is interested then or you want further info please contact me though the normal channels...

http://cgi.ebay.co.uk/MERCEDES-SL-INDICATER-STALK_W0QQitemZ220169820027QQihZ012QQcategoryZ10398QQssPageNameZWDVWQQrdZ1QQcmdZViewItem raj

Hi - i,m looking for either a complete engine or cylinder head with cam and valve gear complete ,for my 230 ce 1984. Does anybody know of anybody who has anything reasonable or suggest somebody who may be able to help, has recon engines? Thanks-Phil.

Hi folks, I've been asked to have a look at a car belonging to "a friend of a friend". The problem I'm having is getting the door card off. I have removed the stainless plate at the top of the door (3x screws), the plastic trim around the door latch (1 screw), the bolt at the top of the...

I`ve been wafting around in this wonderful old Merc for most of this year,here are some pics.

Pics. Description to follow... Sale forced by arrival of my third child!

I have a 1984 280 sel auto. The car runs OK generally, but when stopping in traffic, or at traffic lights, the car is stalling. Once stalled, it is taking up to 40 minutes to successfully start the engine again. Does anybody have any idea what may cause this? I am based in Sheffield, UK...