bolts

Hi, I am in the process of ordering chromed wheel bolts for my W126 500se. I just want to know if the bolt seats are conical or ball seats when the UK made Penta rims are fitted. I am a bit annoyed because I fitted spacers on the rear wheels and fitted new wheel bolts, but I didn't make a note...

Genuine Mercedes ML Locking wheel bolts and key. These are used and have some notable wear and tear to the face, bolt shoulders and threads. These were previously bought and cleaned up, however never made it onto the vehicle. I have since sold the vehicle. These may fit other models...

Hello I replaced the oil cooler seals today due to a leak. A complete pain of a job due to the tight space. Unfortunately managed to lose one of the bolts. I looked high and low and could not find it. Anybody know where I can get a replacement quickly. Thanks Sent from my SM-G935F using Tapatalk

I have an oil leak which has got progressively worse, small pools of oil on the road overnight. I have lifted the car and removed engine cover and cleaned up the sump but it looks like I have sump bolts missing please see pictures Can anyone confirm this is the case and would it mean a sump...

Not on the MB but thought I would check the condition of front brakes and so took the wheels off one by one. On one side, I could not budge them, even standing on the brace until it almost slipped. Took it to ATS who managed to get 2 off incl. the locking nut but only after continuously...

I would like to ask if anyone could answer two questions, please ? [1] What is the standard length, thread pitch, etc. for a normal W126 wheel bolt that is used for the Mexican Hat and Penta alloy wheels. I am trying to find a new set of bolts to replace the slightly grubby ones that are on my...

Hi all had a few low coolant alerts so took the car into mb full warranty so wanted to check it out. They stripped down the engine to check bolts arent snapped can i ask them to replace them for new ones? And do i request new gaskets? How much are the bolts? Cheers

Hi, Not sure if I'm in right place but I was wondering if anyone knows good alternative for engine cover bolts for W211 2005 E320 CDi part number A0039904112 Rcently I had leak from injectors and when I took the cover I didn't tighten them enough and I lost them ... only 2 left now and it is...

Hi, I have fitted all new suspension (lower arms, dampers, drop links, top mounts and top and bottom ball joints) to the front of my CLS. It has always munched through the inner edge of the front tyres long before the rest of the tyre is worn out, so I fitted the grooved camber adjustment...

So today my bolts arrived from Mercedes. But isn't there supposed to be some copper washers with them ?

For those of you out there who have the occasion to drill out snapped or broken bolts and have struggled to do so, try these. I have no affiliation or connection here. But have on many an occasion had to drill out bolts and screws and experienced the frustrations of breaking or blunting drill...

So I'm taking my car for a service next week at my dealer. I have spoken to them about the head bolt issue and have asked them to change them while they've got the car. My car is fine and hasn't displayed any of the symptoms associated with the head bolts issues. I am wanting them to change...

Hi all, I am in the process of getting my 2 piece AMG Split Rim 18 inch wheels refurbished by Lepsons. (Picture of wheel type attached) Two of the wheels had been painted before I bought them and therefore the bolts were painted over. Lepsons have emailed saying that they have stripped...

Hi All, I have a set of H&R hubcentric 20mm Spacers for sale. Trak+ DRA series. Bolt pattern 5/112 - Center Bore 66.5 - DRA 40556654 Can be used for rears or fronts. Please check H&R website for fitment. http://www.trakplus.com/application £50 for the pair. Can be collected from...

Really don't want to do this but i've just booked a trip across American in August and need to start getting a bit of money together for it! Genuine 16x8" 190 EVO-1 / SL Wheels Diameter : 16 inches Width : 8 inches Offset : ET 34 Markings : 16x8J H2 ET34 Come complete with bolts as...

Can anyone tell me if I need shorter wheel bolts when fitting the correct steel spacesaver wheel to my W205 Sport 220 Bluetech.

These spacers never got used as I sold the car they were intended for (cls55). They come with the longer bolts as well. Collection preferred from London but can post at cost. £35

In a bid to modernise the outside of my w208 a little, I've bought a pair of plastic, German-style number plate holders. Some cretin has installed the existing plates using screws, and only in two of the four holes. As a result, I'm assuming I'll need to grab some new bolts to fit my shiny...

Hi Gang, After a set of locking wheel bolts for a W211 to fit standard AMG wheels (E55). Thought I'd ask on here before eBay etc - someone must have some spare :) Thanks, Will

Hello, I've just purchased a set of 19" AMG wheels in black for my C63 AMG and want to get a set of black wheel bolts for them but not sure what size I should be looking at. Can someone shed some light on what I should be looking for please?