jacking

Two either side. I can see one in center under engine but is there one in center at the back?? Heard some people jack from center of rear diff but can't do this because of cooling fins, not that I'd do it anyway.

Does anyone know how to pull out the old w204 c class jacking points on the car In order to replace? There's a plastic screw type rivet I've turned but won't still come out. Any tips please

I've been looking at a well-maintained W202 1998 C Class that's for sale. I thought I had checked the obvious, but I missed the condition of the OSF jacking point :doh:. It has rusted badly, and has clearly then been used to jack the car. The rubber pad has been pushed into the sill, with lots...

Looking to get some winter wheels/tyres and self-fit to my 2013 W204 AMG Sport Plus Estate. Going to pickup a trolley jack to make the job easier, where should I be jacking given the trolley jack head won't fit the scissor jack head point properly ? Thanks in advance for any advance.

Hi, new to SLK and want to change front pads. has anyone got any picture of where to jack the car up to place axle stands on the jacking points, or other way around

Does anyone know what the jacking point repair part number is. My man at mercedes said they are only supplying full sills at c £330 now! I was sure they are available separately fir c £50? Scott

Hi there, I have just bought a 1994 E320 coupe and need to repair the rusty jacking points, all 4 need to be cut out and replaced. Can anyone tell me if there is a kit available to assist me is doing this. Thanks Grant

Morning all. I have an enquiry regarding jacking points. If i was to use the jacking points to jack the car where would be a suitable location for me to place the axle stands? Also if i didnt use the jacking points to jack the car up from where would be a suitable place to jack the car from? I...

Hi, I have been trying desperately to find some pictures of repairs that people have done to the rear jacking points on the w123 and in particular how they are attached. I have clear access as the rot is cut out but I can't work out if the jacking point should be attached to the bottom of the...

Just bought a cracking 300ce-24 but remembered my old 123 300 diesel and collapsing jacking points, so removed the plastic sills and wow just a little surface rust.I'll try to add some pictures amazed how easy it was to remove sills to wax behind well worth doing on any car. can't remember how...

When looking under my car I noticed what looks like a jacking point dead centre, about 50cm back from the license plate. Can anyone tell me if this is a jacking point? Don't want to try lifting the car on it till I know!

I'm going to need some welding done on the jacking points of my W124 Coupe, does anyone know of a welder in the East Yorkshire area, can go to Hull or Doncaster but would prefer local to Howden. Also any idea of cost, I appreciate it depends on size of rust damage but a rough guide would be...

The four jacking points on my W168 A class are looking a little sorry for themselves. Part number A0029974786 (I think..) I would like to fit new ones, are they easy to change?

As thread title. I need the metal jacking point as my existing ones have rusted, not the covers. A couple are bad enough to needing cutting and replacing. Do MB still have these and are there any part numbers for these sill parts?

...the car by the differential. A good idea or bad?

Hi, just purchased a C180 K Estate (2005) and cannot find any jacking points other than the ones on the sills for use with the wheel changing jack. Wanting to use my trolley jack and axel stands to tale the wheels off for a clean but am stummped as to where to locate them. Mr Haynes was...

hi i want to put the whole car up onto 4 axle-stands. i saw this "how to" for a BMW... impee's DIY Raise BMW On Jack Stands - BMW e46 what is the suggested method for a W124 estate and where in the centre area at the front and back could i jack it up? thanks Derek

:wallbash:Well I thought I'd have a poke with a screwdriver to see if there was a problem... well i shouldnt have touched them as they were paper thin...and now i've poked the holes got bigger and bigger...!!!! both rear are rotten...front seem fine.. what should i do ?have there been previous...

Where do I position/locate a trolley jack on the floor to lift my SLK320 (year 2000)? I have the jack that locates in the holes on the sill but would prefer to use a trolley jack for lifting each corner & I can't see anywhere obvious to position a trolley jack!

Seen some great references on this site and my thanks to people who spend literally hours updating their threads - v.impressive. For my part, I've decided that my wifes ageing 124 coupe needs some TLC. So have decided to replace the front wings and have the car repainted. Having removed the...