ml300

Hi everyone, I recently bought a '12 ML300 from a small dealer in Bath. I found a couple of issues in the first month having it. Would be very grateful if you could share some thoughts. One issue is the rear parking sensor. Long story short. Within a month, I noticed the rear sensor didn't...

Hi all I've had the ML for a few months now and loving every mile in it Today I had a weird thing happen I had stopped at the garage to check the tyre pressure When I come to start it all the lights were on the dash but it would turn over I took the key out and tried again and it...

Hopefully rotated correctly!

Full Details http://mercland.com/car.html?id=3576 Mercedes ML300 CDI Sport BlueEfficiency Automatic Vehicle Specs: General • Registered 23rd March 2010 – 10 Reg • 71,022 miles only with Good Service History (see below) • 3.0 Litre V6 Turbo Diesel Engine • 7 Speed Automatic &...

After nearly 4 years of trouble free ownership, the time has come to part with my ML to make way for a GLC. I bought this car from MB Epsom in Surrey as an approved used vehicle with 32k miles. 59 plate registered December 2009, it has just ticked over 54k miles and is supported with...

Hi guys. My rear parking sensors have stopped working, when I engage reverse gear, I get 2 solid red lights and the beep which then switches off after a few seconds. Front sensors work fine. I'm told that it's likely to be 1 sensor not working. Are they easy to remove? Or do I have to take the...

Hi guys I'm going to view one on Monday with only 22k a 2011 plate. Anything I should look out for etc and what are they like to own. It will be my 5th Merc but 1st SUV. Iv always admired huge cars and think I'm ready for the step up now. Any suggestions welcome

Hi all, Gauging interest for my ML300 CDI Sport Blue Efficiency registered Dec 2009 on a 59 plate in Obsidian Black. I bought the car from MB Epsom so approved used back in Dec 2012. Only 1 previous owner from memory and FMBSH covering 49k miles. Car is due a service shortly which will be done...

Hi all,looking at a late 2011 ml300 cdi grand edition tomorrow, 1 owner 24 k miles with full mb history,anything other than the obvious to look out for as never owned a ml before,appreciate any feedback.:thumb:

Hi guys I need to fit a tow bar to my 2010 ML300 W164. Fitting the tow bar is no problem and wiring it in is no problem, even cutting the bumper is problem, the part I'm unsure about is removing the bumper. Is it all done from underneath? I had a quick look earlier but was wondering if...

Could anyone tell me if 616 is the code for cornering lights on an ML300. It is a December 2011 car. The salesman wasn't sure but says his boss says it is cornering lights. Thanks in advance

I Guys I know this post may seem abit vague with info but I'll give it a shot My 2010 ML 300 sport (w164) has an occasional front end knock, doesn't happen all the time and mainly hear it I pull away at full lock or drive slowly over pot holes. I've had both front wheels off and checked very...

I'm hoping someone can shed some light on this bizarre problem (at least I think it is anyway) on my recent ML purchase. It's a 59 plate with 30k and full MB history, bought from MB only a few months back. The problem I am seeing is engine idling/revs behaviour, from cold it idles at just...

Hi guys - have just bought a 59 plate ML300 and have got a Mercedes ML Class W164 X164 Comand APS NTG2.5 HDD navigation sat nav DVD SD to retro fit. Appart from antenna, i have no other wiring. Can anyone help with what do i need and is it a fairly easy installation?

Well, its the dogs fault, he arrived January TT (Previously two Boxsters) has being traded awaiting delivery of a new Iridium ML300 CDi Sport, so if any other owner has some real life pictures to keep me going, appreciate you posting them, brochure/web pictures are useless, anyway ticked...

Hi All, get my new ML 300 CDI Sport delivered on Thursday and lets just say I am a little bit excited. It's my first MB, so can't wait. In fact I'm like a spoilt child and driving the wife mad with the wait!!! :wallbash: Just thought I say Hi to you all and look forward to chatting in the...