pulley

Has anyone changed their supercharger belt tensioner recently? that might have the old one still lying around? I need the centre pulley bolt off it as I have rounded off the internal Torx splines on mine :doh: I want to replace the bearing on the pulley.

I've been having a look the options and packages offered. But I'm stumped to see how a pulley warrants a over £2200 over the other package? How much better can it be ? Anyone had it done ? Is it worth the money? My searches on here were not helpful as mainly for other cars and not many if...

Want to but a pulley holder. Something similar as in picture etc https://cdn.shopify.com/s/files/1/0210/3404/products/A1099Web_1024x1024.jpg?v=1369763546

Hello! Ever since I got my 2006 cls350 it has had a whining noise from the engine. Using some flexible tube held to my ear like a stethoscope I located the source of the noise. 2 of the pulleys at the front of the engine that the serpentine belt goes round were the problem. One was just a...

I've searched but can't seem to find a definite answer.... What's the pros and cons ? Is one better than the other, last longer? Make more/less power Lee

When I started my car this morning it was making a really loud ticking noise, looks like the noise is coming from the bottom right pulley (indicated with red arrow in photo). Can any please tell me: 1) What this pulley does? 2) How easy is it to replace? 3) Part Number? 4) Estimated cost...

Anyone in the UK running one on an E55? Where did you get your car tuned after fitting? And how does the car drive without it?

An SL55 that came in for a lot of Mechanical work and a Remap & Pulley!!! Stock: 472.9 Bhp 584.81 Ft Lbs Torque Tuned: 536.59 Bhp 615.97 FT Lbs Torque WJX1DlRal5g

Hello all, I recently upgraded some parts for the C32 and have the originals left over in perfect working condition. Would anybody be interested in these parts? Was hoping on £100 for the lot but open to offers. The intercooler pump alone is only 6 months old and cost £120 new. I also...

Hi All, I've an '89 300E, manual. There's a chirruping/clatter coming from the front. At its loudest by the water pump. When I spray water on the belt the noise goes away, so I suspect alignment. The other part of the mystery is that when driving if I depress the clutch the noise...

We have several sets arriving next week 84mm Supercharger Pulleys - £399 Shipped to UK Address Boost Levels: Stock: 11.2psi 84mm SC Pulley: 12.5psi Details can be found on our website Eurocharged 55 Series AMG Supercharger Pulley- tuning option - Pulleys - E55 - E-Class - Mercedes -...

I have a spare idler pulley set for the M113K engine. The s/c idler pulley is subjected to significant sideways force and this leads to wear on both the bearing and internal wall of the pulley. Often when you come to replace the bearing a perfect fit can no longer be achieved as the internal...

Hi my car is remaped already and I want to install smaller pulley is necessary to remap again ? If yes any one can recommend good tuner in London/near London?

Hi I don't know if I post this in a right place ,but anyone know how to reset adaptation without sd by pulling a fuses ?

As the title suggests I need the torque figures for the drive belt tensioner and idler pulleys on my E220 CDI W211. I am replacing them along with the drive belt but the Haynes manual does not include either the procedure or torque loadings for the tensioner or idlers.

Well my 65mm pulley I ordered from IBF in Poland left Poland last Thursday via GLS post and it's now sat at my local Parcel Force depot ready for delivery tomorrow (not bad going IMO), I've also booked with Eurocharged for the end of the week, can't wait...... In preparation for it's power...

After talking with Eurocharged last week I wanted to go and collect a pulley and map but they don't carry the pulley's in stock so you have to wait 2 weeks for it to come from the states. Well I'm not that patient and I really want to carry out this power upgrade asap, why they don't keep in...

Hi Guys, Recently I began hearing a noise coming from the belt area when the car was cold, and what we discovered is that the crankshaft pulley is coming apart (a photo is attached below). A new pulley where I live would cost about $350, so I was wondering if it's plausible simply to use...

Hi, I have recently bought a larger crankshaft pulley, and i want to know if there is any problem using it without a new soft/powerbox. I heard that if there is too much air, some engine parts could overheat/melt. AND i don't want to risk that! Engine M111.956 200k 163hp. Pulley 193 mm ->...

Hi, I have recently bought a larger crankshaft pulley, and i want to know if there is any problem using it without a new soft/powerbox. I heard that if there is too much air, some engine parts could overheat/melt. AND i don't want to risk that! Engine M111.956 200k 163hp. Pulley 193 mm -> 220 mm