remove

Hello, i have a problem with air at fuel lines. I replace the O-rings, 4 of them and when i start the car only at one place don't clean the air, and when engine works there is left a little air space, when i stop the engine the fuel going back to somewere. I have something like hand pump but i...

On a recent trip to Scotland my car was bombed overnight by a seagull. A single strike in the middle of the windscreen. In the morning I soaked the offending concrete-hard sh*t with water and gently rubbed with a cloth until it was removed completely. Obviously the seagull had taken in some...

As above. Any tips? :-(

Anyone know any good products to remove the old sticky pads wheel weights were on? They are a pain to get off :( Thanks

I have decided to do away with the double din command in my S210. The MW signal is hopeless at best and the CD changer has developed a fault - common in the 210's I have owned. So, can anyone recommend a single din DAB radio that has at least one USB port. Also, when I remove the double din...

I have decided to do away with the double din command in my S210. The MW signal (if present at all) is hopeless at best and the CD changer has developed a fault - common in the 210's I have owned. So, can anyone recommend a single din DAB radio that has at least one USB port. Also, when I...

Hey guys Can anyone help me out with an easy way to remove centre caps Cheers

..Anyone?? My Van was liveried then all the decals removed before I purchased it, it takes a cracking shine but I swear to God, I think the previous owner has painted over the decals of his business, on the bonnet say, despite orbital buffing you can still see the marks of an "Electricians"...

..Anyone??:dk: My Van was liveried then all the decals removed before I purchased it, it takes a cracking shine but I swear to God, I think the previous owner has painted over the decals of his business, on the bonnet say, despite orbital buffing you can still see the marks of an...

My driver side seat belt is very slack to a point were I have to feed it back in order for it to retract otherwise it smash open a hole on my speaker grill :crazy:. It is an MOT failure and I have one coming up soon. Does anyone know how to remove the rear trim which houses the belt...

3 of the LED's on the third brake light on my 2012 C220cdi Estate are dim and flickering. I'm hoping that it won't mean a completely new unit, but I'm having trouble working out how to remove it. I'm guessing that the trim round the rear screen has to be 'levered' off, but I'm hoping that...

Had some water spots on my bonnet, tried most things but they were still there, did a bit of googling and found out that white vinegar diluted with 3 parts water, applied with a soft cloth, gently wiped over the area a few times, then rinse with plain water. Hey Presto all gone. you do have to...

Can anybody help me whit one advise how to remove the electrical contact from the back of steering wheel on Mercedes w124 whit airbag please ? I attached pictures to be more specific! Ps I want transfer from one to the other.

Hi All, On my car, the piano black trim has some very light scratches. What is good to remove them? Cheers,

I am having my windows done tomorrow, but can figure out how to remove the rear headrests. I can lift them up, but there is not enough height to pull them out. My rear seat is fixed, so cannot be tilted forward, unless I am missing something. Thanks

Hello. I have successfully removed the rear subframe from my CLK 430...and all went well . I have fabricated a wooden platform with wheels to be able to move the subframe around the garage and out for blasting. The only issue I have is the handbrake cable is attached to the subframe via a...

Folks, this is for only the highly technical amongst you :) How the hell do I get this insert out?

Just returned from from quick supermarket shop and ignition key will not come out. It seems that on the final turn prior to pulling key out, it feels slightly 'sloppy' and not reaching a final click position. Today is Sunday so will return to garage tomorrow but if key is still in ignition can...

Just thought i would contribute on my findings when removing the front and rear diffusers for a facelift C63. Guides across the forums tend to lean more towards the pre-facelift or facelift cars which use slightly different bolt configurations so hopefully this is helpful and relevant. Pictures...

Its nearly a month since my w124 moved now and my electrical is starting to do my head in! Ive started checking everything and now fully understand the circuit I am down to checking a couple of wires with my Multimeter between Pin 12 of the light Control Module and the junction box near...