sensor

I have just bought A CLC 220 CDI Sport 2010 and having plugged in an OBD reader and even though there was no MIL warning code P2237 was showing. O2 sensor bank 1 sensor 1 open circuit. This is either a break in the wiring or the heater element has failed. Here is the procedure to replace the...

Is there a button to isolate the interior alarm sensor and if yes where is it? Have a dog and can't find anything in the manual - don't have the car yet to look.

Does anyone know if there's a fuse for the MAF as have bought 2 brand new ones now and is still coming up with the same fault codes the first one I bought was for £23 off eBay and the one I fitted yesterday was a HAAS one from eurocarparts for about £120 but am still getting codes for MAF or IAT...

Hi Guys, I'm new here :thumb: I've been lurking for a bit but I am in need of a bit of advice so I thought I'd drop a quick post. My Car: 2010 Mercedes C250 W204 - 75k FMBSH - Mainly do short trips as of late (Which I know it not good for a diesel) So, I've done a quick search through...

Hi everyone, I've recently bought a clk320 cdi. I got a friend to plug it into his computer as its running a bit lumpy and it came up with a faulty maf sensor. I've tried looking for a replacement but I'm really struggling I phoned Mercedes and they wouldn't give me a part number, just a...

Hi guys as the title suggests, any tips pit falls etc of changing bank 1 sensor 1 (pre cat) o2 sensor, do these things snap etc? Thanks in advance

Hi guys can anyone provide me with the part number for o2 bank 1 sensor 1 (precat o2 sensor) for a e280 cdi sport w211 3.0v6 tia

Hi Fellow forumites I have just suffered having the covers from my door mirrors nicked:mad: Is there an addition to the alarm system that you can add to give proximity protection. It seems a it of a craze around Birmingham at the moment.they were taken from the car whilest on the drive last...

Hi All, I hope someone can help. Had a car involved in an accident and unfortunately the driver's airbag deployed. Purchased a new steering wheel airbag and fitted, however, it doesn't seems to work at all (buttons not responding, not even the horn working). The dashboard comes up...

Hi, Not having a lot of luck tracing a fault (running very rich), no diagnostics on. Indie thinks it might be air mass sensor, but before I blow another £200, I thought I'd check the voltage. Looks to be idling at about 0.67v, 3000 rpm 1.9v and 2.3V @ 4200 RPM. I had seen another thread...

hi does anyone know the location of the oil level sensor? i changed the inlet manifold over the weekend and i must have got close to it and disturbed it as I've got the light on,before some people ask yes I've checked the level lol,cheers in advance:wallbash:

Hi All, Is there an easy/quick way of turning the interior sensor on/off without having to go into the vehicle settings EVERY time you need to switch it off? On other cars you can press the lock button multiple times and it disables the sensor, but I'm not sure that works with a C Class...

Folks I am trying to narrow down some niggles on my 300TE 4-Matic. The car pre-dates STAR. One of the inputs for the 4-Matic is the Steering Angle Sensor. Were this to be faulty? Would I expect to get a "blink code" ? Also would I expect to see any problems with the steering/handling? I...

Hi everyone, Does anyone know the location on the engine for the camshaft sensor on a 2010 B200 CDI W245 engine. I have looked all over the cylinder head and cannot see it anywhere. Any help would be gratefully received. Cheers Stan

Does anyone know part number for this sensor? MB got them front, back ?

We are presently offering front and rear parking sensors fitted with display for £648 inc. This is as near to factory look as possible without the huge cost of using genuine parts. It includes the sensors, displays (mounted in factory location), Canbus interface for speed sensitivity, labour and...

Anyone have any idea how the level sensors should work? i.e should the voltages go up or down when the car is raised or lowered.. Mine seem to go up and down on different corners of the car when its raised or lowered so there is no way for me to know what is right. Also I cannot calibrate level...

Hello, My Vito w639 only has a factory immobiliser so I just got professionally fitted a oem clifford 330x1 alarm to make it a full Thatcham cat 1 alarm upon collection I asked the actual guy who installed it what the sensitivity on the shock sensor is set to which he answered it's been...

Hi can anyone help,I had the engine light come on, and borrowed a snap-on solus machine to read code, po2031 I think, it stated exhaust temperature sensor on bank 1 failed, I bought new one from mercedes fitted it ok, but engine light keeps coming on after about 30 miles,same fault I have...

Hi all. Does anyone know the location of the above sensor? part # A202 820 74 26 in my 2001, W208, CLK 320 Convertible? Regards Ray