size

Hi all, Can anyone tell me what size wheel I can up to on my e320 w211 estate please.

Hello, I have a 2015 W212 E220 AMG Sport The Tyres currently on it are 245/40R18 Y 97 Front tyre (8.5J) 265/35R18 Y 97 Rear tyre (9.0J) I have purchased some new wheels and it has got nearly new tyres on it. Front and Rear wheels are 8.5J ET 50. The tyres are 235/40R18 all...

Hi, Does anyone know what the internal bore size is of the rubber pipes that connect to the side of the heat/exchanger/Intercooler unit??

Hi Guys, Does anyone know what the drive format should be for SD cards and USB for the NTG 3 / 3.5 system, which is basically the S-class version of the NTG 4 system? I'm guessing its probably the same as that used in the NTG 4 anyway. I've tried exFAT and NTFS, neither of which seem to...

Hi Chaps, I have been considering replacing the space saver with a full size alloy but will it fit. My reason for asking this is because I did the same for my previous car (Rover 75) and the boot floor would not fit flush, it was sitting high as it was resting on the spare tyre. Many thanks Paul

Hi Am sure it must have been asked before but I have used the search! Can a full sized 16" wheel fit in the wheel well? Don't like a space saver as I regularly tow. My local dealer says no as the well isn't deep enough and it would "raise" the boot floor but it looks deep enough to me...

I bought a Circoli Thermostat Product Code: 209220340 yesterday. It fits ok but the 2 holes to attach cable holders are the wrong size. Therefore the original screws don't fit. Should ECP/manufacturer not be providing new screws or is this a defect?

Anyone running 10.5" rears? What size tyres are you running Thankyou

Just had some new tyres put on the rears but not 100% sure they are the correct size. 255/35/19 Right?:dk:

Been having some hesitant starting issues with my w124 230e (m102) New OVP Plugs etc Runs fine but cranks several times before it fires seems to be getting worse :( Its been suggested It could be a vacuum leak and I should replace the Vacuum hoses as on a 27 year old car they will of had it...

Hi. I have an S202 C200 estate of 1997 vintage. I am currently in Hungary, and have a problem with it. There is a strong smell of fuel when the tank is fuel, and upon investigation, it seems the fuel tank breather pipe is a bit perished and is leaking fuel when I have brimmed the tank full of...

Hi.Ive just pulled my r129 320 out of hibernation and am wanting to fit new wheelbolts.The alloy wheels have AMG stamped on them.The inside has AMG and also OZ racing stamped on it.If they are gen amg wheels what size bolts are needed 12 or 14m? The car is 1994 and wheel size 17inch.

Being a novice at this kind of thing I’m trying to work out if it’s possible to fit AMG Type III wheels from and SLK200 onto and A200 Turbo and what the pros and cons might be – the AMG’s that come standard on the A200T are 18x7 all round, I think the equivalent ones on the SLK are 18x7.5 front...

Hello, I have just lowered my 2002 CLK-500 Avantgarde by 30mm, please can somebody advise me what would be the largest wheel & tyre package i could fit, I was thinking 19" alloys, with 245 tyres on the front with 275 on the rear, would this fit ok or rub ? Thank you in advance.

Hi All I had the use of a new CLA for a couple of weeks, really looked nice from the outside, inside wasn't too bad but some bits did feel a bit cheap and ride quality was pretty harsh, also road noise was quite intrusive which makes long journeys more tiring, this got me thinking, if you...

For the first time ever I've decided to buy the same car again. Well almost. On the strength of my ml 320 W163 still going strong with 206k, I've decided to get a W164. But on viewing a 2006 320 CDi Sport, the log book gave an engine displacement of 2185cc. I decided to walk away there and then...

Good afternoon all. First post, please excuse any noobness to this forum. I am actually writing on behalf of my Mrs' father who is limited to just some English language. He has recently purchased a Mercedes B Class 180. I am not altogether up to date with the specifics but i have...

I've just up graded my alloys from 16" to 17" I've also replaced my space saver with a full sized 17" alloy, now the spare wheel tool holder A2048980007, the black plastic tub like item that holds the jack and tools does not reach the screw to lock down, Is there a W204 part number I can get for...

i am looking to buy an e class 2004-2007 which is the best engine size to go for 220,270/80 or 320 for reliability,economy and driving enjoyment.

Hi All, I can't remove my wheel bolts!! 17mm socket doesn't fit properly (nor does anything else is my socket set). I managed to get one off with a 17mm socket but not comfortable forcing the socket on the others bolts as it's clearly not the right thing to use. Anyone come across this...