valve

Hi everyone I own a 190e 2.6 can anyone tell me which valve spring compression tool you use to remove the valves and also how much lateral movement there should be or not be on the pistons thanks.

i have a 2003 clk270cdi and i removed the egr valve to clean it,since refitting the management light has come on,i purchased a carsoft i980 to delete the light but it comes back on 2 minutes later,the i980 states egr valve central too low,what could i have done to make the light come on

Does anyone know if just the valve can be replaced or does the TPM also have to be replaced if the valve is leaking?

after removing,cleaning and refitting my egr valve on my 2003 clk270cdi the management came on,i have purchased an isoft i980 and deleted the fault code,however it came back on 24 hours later,the fault code is P1403-032 which then states EGR VALVE POSITIVE CENTRAL VARIATION TOO LOW,can...

Hi all I have a cls350 cgi which has just come up with the engine management light. Took it in to my local specialist today and the fault coming up is the right hand egr valve is jammed open. Apparently these cars have 2 valves a left and a right and you can only buy them in a set of 2...

I've had turbo and EGR valve replaced (garage said that valve was sticking) but it's gone into limp mode again. Doing my head in. Any ideas ? Car is CLC 200 CDI.

Hi, My gearbox was suddenly switching to neutral from first ger with hitting impact on 5 to 10 mph. When I`m putting car on reverse the whole car starts vibrate. Took car to garage, they are telling me it`s most likely Valve body. Labour - £240 + to fix valve £350 + oils and bits £80 = £670...

hi my wastegate actuator is not moving, think it has nothing to do with the actuator because if i push it and cover the hole with a finger it holds the arm in. can the pressure converter be damaged ? i´ve seen on a bmw forum that they connect the actuator hose to the EGR pressure...

Do I need to use a torque wrench for the nuts when changing the valve cover gasket or can I just do it by 'feel' ? :confused:

I had a valve body recond but the guy who did has actually made it worse the valves are now sticking, iv stripped it and down and im not happy with it. I need a replacement. Am i best buying from mercedes or is there a reputable supplier for them? I know there is nothing wrong with the trans is...

About a year ago i was coming to a standstill to do a u turn and suddenly the gearbox went into 2nd and stayed there and would not change up,no lights on dash. Stopped, and only having the motor 2 weeks turned it off and sat for 1 minute and as being digital hoped something would reset and it...

I have a W210 E200K. Engine type M111957 I am getting fault code P0010 - “A” Camshaft Position Actuator Circuit (Bank 1). I am also not getting any supercharger boost because the air flap valve/bypass valve (the thing next to the air box, above the supercharger) is remaining wide open all...

Hi all I'm desperately after one or more of these valve dust caps. Please PM me if you have any to sell. Many thanks Jim

I'm carrying out some maintenance and I have removed the resonance valve. 94 SL 3.2 It has a rubber nipple by the electrical connection, that just vents to the atmosphere, when I suck it operates the valve. Is this correct? I can't find a loose vacuum pipe it could connect to.

Hi All, Had my slightly bent front wheels straightened today. The chap doing the work said tyre valves were corroded. Unfortunately one of them broke whilst finishing off and inflating tyre. Car has tyre pressure sensors and he says I'll need a new sensor (circa 100 pounds). Is this correct...

Evening all-does anyone know the part number for these valve caps please? TIA

Hi all, just bought my new SLK55 amg and as I am sure you know when you plant it something in the exhaust opens. My question is can you open these valves all the time and do you get the noise all the time and if so what do you do:bannana:

Hi, looking for a working EGR valve for a 2004 MB C220cdi W203. If anyone has one for sale please contact, thank you.

Hi guys, first of all MB 722.6 trans valve bodys, are they interchangeable.? Example. 722.696 out of a 93 E240 & one from a Ci80 with a 722.695 or one from a E320 the 722.6?? number escapes me. Reason for asking if they are the same I would like to procure one & have it reconditioned & when...

I knew my time would come soon enough! My car is sagging (mostly the rear) and a Merc indie is saying that it will be £500 + VAT for a second hand replacement, or £1500 for a new part. I've seen the DIY posts, pictures and helpful YouTube video showing the step by step process of repair...