Help wanted

Page may contain affiliate links. Please see terms for details.

general patten

Active Member
Joined
Apr 21, 2013
Messages
194
Location
Hastings
Car
S320 limo w140
I have a 1995 e220 coupe been lowered 40mm, Will a set of 18x8 pcd 112 bore 66.6 offset 45 fit my merc.....NOT SURE IF THE OFSET IS TO MUCH....let me know asap as i can get the wheels cheap..Thanks to any1 that helps..ps best size tyres to fit as well
 
Is your E Class the W124 model or W210 ? The W210 can run 18" wheels easily, but according to Alloywheels Direct.net, the W124 model only goes up to 17"
If the wheels are not staggered, 235x40x18's all round are the tyre size you are looking for on a W210.
The offset for a W124 is ET42, so an ET45 is fine. The W210 has an ET of 41.

This website is good for cross checking what will fit.
Mercedes Alloys - Alloy Wheels Direct
 
Is your E Class the W124 model or W210 ? The W210 can run 18" wheels easily, but according to Alloywheels Direct.net, the W124 model only goes up to 17"
If the wheels are not staggered, 235x40x18's all round are the tyre size you are looking for on a W210.
The offset for a W124 is ET42, so an ET45 is fine. The W210 has an ET of 41.

This website is good for cross checking what will fit.
Mercedes Alloys - Alloy Wheels Direct
w124 e220 coupe... so et45 will rub on nowt?
 
Someone with more knowledge than me can answer this one, but as I posted, 17" was the maximum size shown to fit a W124, so the ET is fine, but not the size as far as I can see. Also, dropping it 40mm could make a difference too.
 
any more help
 

Users who are viewing this thread

Back
Top Bottom