Jack stands

[Brent]

Hi all, I have a 2004 c class estate, had it 18 months.
It's got an annoying rattle underneath at the rear, it's not the exhaust.
I've bought a trolley jack and jack stands, my question is where do the jack stands go. Your help would be much appreciated.

Brent

 

[PobodY]

If you've got an appropriate pad for them, I'd put them under the jacking points. - Failing that I normally use suspension mounting points.

 

[Auto-mobile]

Rear diff and then put your axle stands under the jacking points.

 

[A250 Bennyboy]

You may need one of these if you have the AMG sills fitted
Look at this on eBay Genuine Mercedes-Benz C-Class CLS CLK E-Class Jack Pad Point Block A2039970186
This was the one that fitted my car.
Look at this on eBay 2 x Mercedes Benz Rubber Jack Jacking Pad adapter Tool Hard Rubber A B C E G M R | eBay
And got these for my axel stands
Look at this on eBay 3x Trolley Jack / Axle Stand Rubber Pad Classic Car - ( Ice Hockey Puck ) | eBay
Cheers
Ben

 

[Brent]

Thank all most helpful....
Brent

 

[OneForTheRoad]

check the aluminium heat shields , the fittings corrode leaving the shield to sit there and rattle .