Maf guide E350

[dannyp1512]

Need some helps peeps I need a fitting guide for a maf sensor on a E350 cdi coupe c207 2010

Help would be very appreciate

Many thanks

 

[Mr Filipov]

So you’ve got 3 clips on the intake pipe. One either side for the air filters and one for the turbo side. All are the ones you do up ir undo with a screwdriver.

Then youve got two clips going into the maf sensors. Unclip them and you’re good to go.

Fitting the new one is the same in reverse. If you are using a new seal for the turbo I would suggest dipping your finger in some oil to lubricate it as it goes back on, if not a bit of soapy water should suffice. I am sure you don’t want a boost leak or to break the new seal.

 

[dannyp1512]

Nice 1 very appreciate

 

[Mr Filipov]

Oh, I also saw another smaller pipe next to the inlet hole for the turbo side. Make sure you don’t miss it.