Does anyone know any suppliers of the above. The size is M6 x 42mm and they must be stainless steel and left handed thread. I have been quoted £2.56 each but I'm not sure if that's the going rate or not
Suppliers of left handed threaded bolts
Page may contain affiliate links. Please see terms for details.
bolide
MB Enthusiast
OP
OP
OP
OP
Back to the drawing board I'm afraid. Rang Namrick this morning and they don't supply them
brucemillar
MB Enthusiast
- Joined
- Nov 18, 2010
- Messages
- 8,663
- Car
- C55 AMG Wagon - W124 300te 4matic Wagon - BMW 4.8is X5 E53 - SWB Pajero 3.5 V6 24v
I know a good supplier of left handed hammers. Sorry.
Was it not Ned Flanders in the Simpsons who opened the Leftorium, a shop for left handed people?
Unit 10, Castleacres Industrial Park, Castle Road, Sittingbourne , ME10 3RZ 1.2 miles NE
Tel: 01795 500651 Fax: 01795 429362
Was it not Ned Flanders in the Simpsons who opened the Leftorium, a shop for left handed people?
Unit 10, Castleacres Industrial Park, Castle Road, Sittingbourne , ME10 3RZ 1.2 miles NE
Tel: 01795 500651 Fax: 01795 429362
Robster_1981
Active Member
- Joined
- Sep 3, 2012
- Messages
- 60
- Car
- W210 E320 CDI
are these any good?
Nuts and Bolts - Stainless Steel Fixings :: Bolts :: M6
If you want the thread going all the way up to the head, you'll want a set screw. These are 40mm, but do you really have to have them 42mm long? that is probably why the cost is much higher because it's and irregular size.
What's it for?
Nuts and Bolts - Stainless Steel Fixings :: Bolts :: M6
If you want the thread going all the way up to the head, you'll want a set screw. These are 40mm, but do you really have to have them 42mm long? that is probably why the cost is much higher because it's and irregular size.
What's it for?
If you can't find left-hand metric bolts, this place Metric Left Hand Threaded Bar - A2 Stainless
does s/s metric bars and nuts. You could make up your own bolts with a touch of s/s weld on the heads.
does s/s metric bars and nuts. You could make up your own bolts with a touch of s/s weld on the heads.
- Joined
- Oct 2, 2002
- Messages
- 2,901
- Location
- Woodford Green
- Car
- W140 S-Class, Porsche Cayenne and Porsche Boxster
brucemillar
MB Enthusiast
- Joined
- Nov 18, 2010
- Messages
- 8,663
- Car
- C55 AMG Wagon - W124 300te 4matic Wagon - BMW 4.8is X5 E53 - SWB Pajero 3.5 V6 24v
Tan said:
I thought that was a dating agency.
Mr Engineering
New Member
- Joined
- Sep 30, 2015
- Messages
- 1
- Car
- Ford Fiesta Zetec s 2000
best left hand bolt selection i have found so far - have been looking for a bolt for a circular saw of all things but being a car diyer also i thought i would post this in case its any use to anyone else
Left Hand thread Bolts and Screws to customer specifications
Left Hand thread Bolts and Screws to customer specifications
- Joined
- May 14, 2011
- Messages
- 2,609
- Location
- New Forest
- Car
- ClK 209,190E 201,SLK 170(gone) audi tt vr6 3.2
