W219 offset Q

Page may contain affiliate links. Please see terms for details.

KennyN

MB Enthusiast
SUPPORTER
Joined
Sep 21, 2014
Messages
2,400
Location
Paisley
Car
Me - BMW 440i Coupe / Dog -Cayenne
After much deliberation i have decided to get a set of 19`s for my CLS , my original diamond cut AMG alloys could be doing with a refurb as they are quite tatty around the rims and centres and the tyres will need replacing within the next 12 months or so.

So rather than getting the wheels re-cut at £110 per wheel and putting new tyres on them i am being drawn to these wheels : 19" GM MS005 ALLOY WHEELS FITS LAND RANGE ROVER VW T5 T6 T28 T30 T32 AMAROK at £550 new.

I would ideally like a set of AMG 3`s but buy the time i sourced a set and had them refurbished and very possibly repaired i would be cheaper buying a new set.

Question , the standard offset of the fitted wheels is 25mm F and 28mm R and the Fox alloys above are 35mm F + R , so is it worth fitting 10mm hubcentric spacers to bring it all back to standard or will the increased offset have any implications regarding clearance.

Cheers - Kenny
 

Users who are viewing this thread

Back
Top Bottom