W1ghty
- Messages
- 5,631
- Likes
- 5,229
Latest activity Postings About
-
-
W1ghty replied to the thread A reason to never visit Wales again..Took this little beauty today . Glyders , with Castle of the winds in the centre , Snowdon back left in the distance . -
-
W1ghty reacted to ALFAitalia's post in the thread A Swedish bit on the Side - Saab 9-3 Cabrio with
Like.
Or this.... ...or this! -
W1ghty reacted to SpikyMikey's post in the thread A Swedish bit on the Side - Saab 9-3 Cabrio with Like.
Reminds me of this:
-
W1ghty reacted to Alex225's post in the thread A Swedish bit on the Side - Saab 9-3 Cabrio with Like.
So the convertible 9-3 has been serving us well, my other half has commandeered it as her daily car now. I have the other Saab and she...
-
W1ghty replied to the thread Spring Replacement?.I used my cars spring colour code and then cross checked it with Sachs springs on AUTODOC to get the same colour code .
-
The colour coding on the springs denote the spring rate for your specific vehicle , it is option dependent so there wont be a single...
-
Is it supposed to be black Sarah? Or are they chrome but wrapped in a black vinyl?
-
W1ghty reacted to 23 Romeo Tango's post in the thread Advice regarding driving to France and Switzerland with Like.
I keep dropping in hoping to get some advice on driving to France and Switzerland.
-
W1ghty replied to the thread 2010 ML300 stiff PAS.I did think it was unlikely that I was wrong , thanks Mr J :cool:
-
It does have fluid, it’s just an electric motor driving the pump rather than the belt
-
Had the actuator off took apart greased it cleaned oil off it. So looks like if want to replace it I'll have to order a new turbo and...
-
Other than checking what you can see visually a scan may show an open circuit somewhere, indicating a broken wire in a loom ?
-
Istr that for some reason some earlier Mercedes had the washer fluid light wired into the same circuit. Could be worth checking out.
-
Is this warning on all the time or just when you switch ignition on?
-
Some car manufacturers specify de-ionized water to be used when mixing anti-freeze for the -40C or so lower temp requirement. If the...
-
-
Loading…
-
Loading…
