Recent content by ahuncutka

Mind you, not sure how much it matters but its 18c outside = 65F'

Hi alabasi, when i first reved it up the low side dropped to 10psi but after 40-60sec and steady 2000rpm low side sits nicely at 20psi and does not move. the high side sits at 170-180psi nice and steady... ??? Is that any good???

Hi, Can someone help please! It looks like, something not quite right with my aircon on the Viano. It needed a small amount of recharge as it was not cooling... Apparently only needed a little refrigerant to make it cool. The analogue pressure gauges now show 18c outside & Engine ide: moving...

Yes I can hear the compressor kicking in, and 2 sec later the hissing starts in the dash under the blower motor or thereabouts... Sounds like youre spraying from a pessurized can inside a closed box??? :) In the centre console Stationary refrigerant pressure engine off is 5 Bar after letting it...

Hi guys, Thanks for the quick reply... When I say hissing... Its hard to describe. at first I thought it was the blower motor rubbing or something... but its not. Ive fitted a new one. :) The sound comes from below the Blower from where the evaporator is located but not a leak kind of hissing...

m80, Thanks for the reply ive removed everything as suggested... there seems to be no mechanocal issue all flap motors work well from what I can tell. Ok A little update. hopefully someone can help! Star shows compressor running @ 96% current 0.8A, B12 refrigerant pressure reads between 8-12...

Hi Guys, I need a quick help on where to find and replace the air blend flap/motor actuator in a 2010 viano/vito... The issue is that there isn't any cooling on the passanger side. and not prefect on the driver side either. If i turn the temp dial to hot. It gets hot, but If I turn it to cold...

Hi, Thanks for your help! It looks like my brilliant mechanic has found the issue! just like you have suggested. ( he has also read your reply on the forum) :) Some cables were shorting out in a black conduit that runs to the starter. Ordered another on approx. £70 Really appreciate it!

Cheers everyone! the £20 is on its way!!! :) Sorry I've messed up my first post, but you can read the second one. maybe you can help??? But at least I've had some attention! :)

Hi Giantvanman, Thanks for the info. well what I don't understand is, I thought of the starter solenoid or a relay if there is one. but the solenoid is part of the starter motor isn't it? and its absolutely brand new. But why would the solenoid make the starter motor re-engage, after the...

Hi everyone, I’m in a desperate need for some help. In a nutshell: the new starter motor kicks back in and starts running while driving the van! I stop the van, turn the ignition off, take the key out and it’s still running. I have to disconnect the battery lead to stop the starter motor...

Hi everyone, I'm new to this forum so please forhive me if I'm doing something wrong... :)