Recent content by Andy67

Now sorted just a bulb. needed . Bargain

My Xenon Bulb drivers side as stop working, I was intending to swop them around to see whats whats. There is not much room to see inside the unit how to remove the bulbs Is there a easy fix to this, or do I have to remover front bumper and inner wheel liners. to get the headlight unit off.

Thanks DSM for your advice

Thanks DSM for the advice i will take note,, so if i placed a decent pair of stands on the arm in photo and the roll bar all should be good.

Advice Need to replace these drop links on this car, got to say i have never had the car on axle stands before, so much of a novice on doing this. Started to do this work today i brought the links from euro carparts and got the Lemforder make for this car and a 16mm and 7 mm spanners. I put...

Thanks for the reply,, just had it fitted, & yes it didn't need coding,, seems they only need coding if they don't match the rest of injectors fitted to car. Va Va Voom

Hi Happy New Year To All Following on from my last post UPS man came to day with a New Injector Say new its a recon with 12mth that will be Fitted Tomorrow on my CLK 270 CDI Year 2003 Dose anyone know if this has to be coded to the car The injector is 0445110121 Code (2) & or A6130700687 As...

I have same motor as yourself...and had injectors leaking, take a look at my post's on this Black Death,, My Inde in Notts, would charge you about £55 to reseat with new bolt and washer ect.

My injector is leaking took it to MB for a reseating but they told me and shown me that it was leaking from the top were the top screws to the body of the injector, so a new one or recon is needed. Seen on Ebay that there are rebuild kits, but cant find one for this injector, does any one know...

Thank you for the how to, on removing the injector, its a bit to much for me to start it, and i dont have the right tools. so it when to MB Independent Notts today , seemed I only needed No 5 reseating .Cost me £75.90

Does anyone know of a reasonable costing garage in the nottingham/derby area for reseating these injecters.. and a guess at the cost

Thanks for the heads up on the above ,,so this would lead to the Black death.. best get them sorted .

Three weeks ago I added Millers diesel Power Ecomax Fuel Additive to my CLK 270 CDI, just to see if there was some improvement. Took a general look around the engine today I noticed that there was liquid around all 5 of my injectors. And it’s pure Millers. There is no Milky stuff coming...

Thanks Mersum for the reply,, I don't have problems anymore since replacing the MAF ,,it was just a wonder why the reader didn't pick up any codes.

Hi Guys I have just bought a Maxi scan MP020 which I think is Re-branded Master PRO model of a Autel maxi scan MS300 from a Very large car parts company. Stuck the unit into port its did its test and came back with nothing Codes founds 0 Monitor N/A 11 Monitor OK 0 Monitor INC 0 The car is...