Recent content by dazblink

  1. dazblink

    Vito w639 charge movement flap

    Yeah Swirl flaps. I've had them deleted on mine now
  2. dazblink

    Codes P208027 and P200A75

    I've decided to go ahead with the swirl delete and get the dpf deleted too! Sod it, I might even get the egr gone too! Its all too much of a headache. Having the stage 1 map put in while i'm at it :D I got a mate who will do the lot for £400, it's a no brainer
  3. dazblink

    Codes P208027 and P200A75

    So on Friday I forced a regen whilst driving using my icarsoft. It seemed like it was doing the trick as the exhaust reached temperatures of up to 700 degrees and I watched as the dpf fill level came down from over 400% full to around 150% which is still obviously very high. I didn't initially...
  4. dazblink

    Codes P208027 and P200A75

    Thank for the reply. I think assuming the regen does nothing for clearing the sensor fault i will book for car in to get an oem sensor fitted. Thanks for the info on the swirl flaps. If the EML still comes on after the sensor issue is sorted, I will look into the swirl flap issue and may...
  5. dazblink

    Vito w639 charge movement flap

    Hi mate did you sort this? I'm also looking for answers on this fault
  6. dazblink

    Codes P208027 and P200A75

    Icarsoft v2
  7. dazblink

    Codes P208027 and P200A75

    Just to add. I checked the dpf fill level and its at over 400% full. I dont know if this is factor in this issue. I plan to force a regen of the dpf this weekend to hopefully clear it out.
  8. dazblink

    Codes P208027 and P200A75

    I'm getting the following codes and the EML comes on about 3 or 4 journeys after clearing codes. P208027 - Temperature sensor 1 Exhaust sytem (cylinder bank 1) has a malfunction. The signal change rate is above the permissible limit value P200A75 - The charge movement flap (cylinder bank 1) has...
  9. dazblink

    C220cdi W204 STOP START PROBLEM

    If there is no light on the button check the fuse on the auxillary battery in the boot or the battery itself. I put a thread on with my stop start issues a few days ago. I ended up just taking the fuse out to turn it off. I get no light on the button now.
  10. dazblink

    Stop / Start (ECO) not restarting engine

    Yeah no faults on TCU. I've taken the 7.5A fuse out for now as somebody suggested yesterday. At least I don't have to worry about having to remember to turn it off on every trip now!
  11. dazblink

    Stop / Start (ECO) not restarting engine

    Just had a play with it on my lunch. Activated the stop/start numerous times by driving around the block and coming to a standstill on the works car park. - 1st time the eco kicked in I had to disconnect the battery as I have been doing. - 2nd and 3rd time it stalled like normal when starting...
  12. dazblink

    Stop / Start (ECO) not restarting engine

    Nope Its the one close to the battery. This one....
  13. dazblink

    Stop / Start (ECO) not restarting engine

    I didnt realise it needed to be coded to the car as its only box of fuses? This is the one that I bought: (AS) MERCEDES BENZ W204 C CLASS ENGINE BAY FUSE BOX BATTERY TERMINAL A2075402550 | eBay Pretty sure I checked the part numbers properly.
  14. dazblink

    Stop / Start (ECO) not restarting engine

    The other fault codes are: P200A75 The charge movement flap (cylinder bank 1) has a malfunction. The emergency position was not reached. P208027 Temperature sensor 1 'Exhaust system' (cylinder bank 1) has a malfunction. The signal change rate is above the permissible limit value. The 2nd one is...
  15. dazblink

    Stop / Start (ECO) not restarting engine

    I have found this data. At this point I had pulled up with ECO light green and the ECO kicked in stopping the engine. This was prior to attempting to pull away when the engine 'should' start back up. (it didn't start back up btw - I had to disconnect and reconnect the battery) I'm not entirely...
Back
Top Bottom