E

Eazyd123

New Member 40 From 🇬🇧
Joined
Last seen
Messages
13
Likes
0

Latest activity Postings About

    • E
      Eazyd123 replied to the thread Glow Plugs???.
      I was hoping that wasn’t the case. It doesn’t make the chain slap/clatter sound at start etc. I was contemplating changing the tensioner...
    • E
      Eazyd123 reacted to m80's post in the thread Glow Plugs??? with Like Like.
      Will the majority of the lights remain on if you turn the key to pos' 2, but don't crank? If not I would suggest that 'whatever' issue...
    • E
      Eazyd123 replied to the thread Glow Plugs???.
      No continuous!
    • E
      Eazyd123 replied to the thread Glow Plugs???.
      I think the term misfire may be misconstrued. It’s hard to describe in words but when accelerating it doesn’t sound smooth it has a...
    • E
      Eazyd123 replied to the thread Glow Plugs???.
      As I thought but it doesn’t the only lights that display are the brake light (when handbrake is on obviously) the green light as I have...
    • E
      Eazyd123 reacted to W1ghty's post in the thread Glow Plugs??? with Like Like.
      Yes it should illuminate before you crank the engine , because with a diesel you wait until it illuminates then goes out before cranking
    • E
      Eazyd123 replied to the thread Glow Plugs???.
      It’s got 92k mate
    • E
      Eazyd123 replied to the thread OM651 924 Timing chain / tensioner.
      Thanks @Tonygw. I wasn’t aware of the wastegate rod making noise but this may well be the cause. To be honest I remember having a BMW...
    • E
      Eazyd123 reacted to Tonygw's post in the thread OM651 924 Timing chain / tensioner with Like Like.
      A loose/worn chain or worn tensioner will be heard at start up, usually cold starts and will last a few seconds. It will make a loud...
    • E
      Eazyd123 replied to the thread OM651 924 Timing chain / tensioner.
      I don’t actually have a rattle on start up. The main reasons for wanting to change are 3 things 1. When driving I can hear a faint...
    • E
      Eazyd123 replied to the thread OM651 924 Timing chain / tensioner.
      Amazing! Do you happen to know if I need to lock the cams or is it as simple as remove old and insert new (once primed with oil)? Thanks
    • E
      Eazyd123 replied to the thread Glow Plugs???.
      Thanks. Just a quick question does the glow plug light illuminate for a short period when turning the key to the first position (before...
    • E
      Eazyd123 replied to the thread OM651 924 Timing chain / tensioner.
      Hi, Do you have any guide on how to change the tensioner? I have a CLA 200d and would like to change it. Thanks in advance
    • E
      Eazyd123 posted the thread Glow Plugs??? in Engine.
      Hi All, I have a CLA 200d (OM651) shooting brake AMG line 2015 (65). Over the last 2 months it has been getting harder to start...
    Show older items
  • Loading…
  • Loading…
Back
Top Bottom