Recent content by Ed209

  1. E

    Can you identify these wheels please?

    Thanks guys. I'll ask the seller to give me the offset printed on the reverse. I want close to ET37 don't I?
  2. E

    Can you identify these wheels please?

    ...and will they fit an S211 with 225/40/18 front, 245/40/18 rear? Thanks guys
  3. E

    17 or 18" Monoblocks to fit W211.

    As per title please. Ideally with a 37mm offset and taking an M14 bolt. Thanks
  4. E

    W211 E55 alloy upgrades

    Ah, thanks so much for the explanation.
  5. E

    W211 E55 alloy upgrades

    Sorry to rake this up, but do those rear tyres rub? I presume these are R230 wheels with 285 rear tyres?
  6. E

    Anyone ever fitted the third row seats to a W211?

    As per title please; is it straight forward? Anyone know if there's a difference between pre and post facelift?
  7. E

    Why does my new thermostat housing have a ball bearing shoved down the thread?

    Oh ok. Well thanks to this I now cannot fit the bracket for the engine cover. :-(
  8. E

    Why does my new thermostat housing have a ball bearing shoved down the thread?

    As per title; I've seen videos of having to tap this part, but I can't even do that what with the bb being in there. Any ideas?
  9. E

    W124 Propshaft donut replacement. Prop to diff orientation?

    Cheers, that's for the flexidisc, but what about prop to diff rotational alignment; there are 3 potential ways to join them. Does it have to be one particular way, or does it not matter?
  10. E

    W124 Propshaft donut replacement. Prop to diff orientation?

    I've been doing some reading and am I right in thinking that the flexidisc is eccentric and will only go on properly in the correct orientation anyway?
  11. E

    W124 Propshaft donut replacement. Prop to diff orientation?

    My propshaft to differential donut/rubbercoupling completely gave up on me at about 50mph, and the bolts tore out. I couldn't mark the position of the prop against the diff when removing the old donut, because the two had become completely detached. Any advice as to how I should reorientate the...
  12. E

    W124 300TD - idle surge/hunting. Delivery valve seals at fault?

    Well I've replaced the leaking delivery valve seals, and although it went successfully, it has not cured the idle hunting. Can anyone offer any ideas?
  13. E

    W124 300TD - idle surge/hunting. Delivery valve seals at fault?

    Hi all, The old girl has started hunting at idle. I've had a weep at the delivery valve seals for a while now, that I've never got around to fixing. Could this be the culprit? If so, can anyone recommend an online supplier for the o-rings and copper washers please? Thanks
  14. E

    W124 Diesel fuel hose diameter?

    Anyone?
  15. E

    W124 Diesel fuel hose diameter?

    Hi guys, I've got an air leak somewhere and want to replace the current 23 year old rubber fuel hose under the bonnet with new clear hose. Does anyone know the internal or external diameter of this hose please?
Back
Top Bottom