Recent content by HIGHLANDMERC

  1. H

    BRAKES STICKING. W208 CLK320 2002.

    Changed both front brake hoses and this cured the problem. Very easy fix, well pleased!
  2. H

    BRAKES STICKING. W208 CLK320 2002.

    Thanks for the suggestion. The spring seems to working correctly. The fault seems to be related to temperature, I am going to investigate a few suggestions and post again when I have further news.
  3. H

    BRAKES STICKING. W208 CLK320 2002.

    Yes the car is black. The spring seems to be functioning correctly but will look for a second spring. Thanks.
  4. H

    BRAKES STICKING. W208 CLK320 2002.

    Thanks for the suggestion. The fault seems to be definitely related to temperature. Yesterday on a long drive, everything was working fine. After a 45 minute rest-stop the brakes started sticking. However once we got up some speed on dual carriageway and motorway the flow of air must have cooled...
  5. H

    BRAKES STICKING. W208 CLK320 2002.

    When cold the brakes are working fine, however after driving for a while and parking the car with a hot engine, when I start driving again the brakes stick. After the brak4s start sticking, if I pull-up the brake pedal then the brakes free up again until the next time I need to brake. The...
  6. H

    CLK320 ENGINE STOPS AFTER ABOUT 10 MINUTES

    Problem Fixed! A big thanks to all those who have posted with advice. The part ordered on e-bay, to which a link was provided in an earlier post, was the wrong part. The CPS on my car only has one lug to secure the electrical connection, the one sent had two locating lugs. Sourced another CPS...
  7. H

    CLK320 ENGINE STOPS AFTER ABOUT 10 MINUTES

    Have just had a code reader delivered and it reads error code P0335 Crankshaft Position Sensor A Circuit. Good bit of kit for £22.99 on e-bay. Mercedes Code Reader Engine Check Scanner Diagnostic Reset Tool OBD2 II CANBUS Still waiting for Crankshaft Position Sensor to arrive, will post again...
  8. H

    CLK320 ENGINE STOPS AFTER ABOUT 10 MINUTES

    Thanks to all who have posted regarding this problem. I have ordered a new Crankshaft Position Sensor from e-bay for £32.22 RPM / Crankshaft Sensor 0261210141 Bosch A0031539528 0031539528 Q0003117V002 New I will report back to this site after fitting.
  9. H

    CLK320 ENGINE STOPS AFTER ABOUT 10 MINUTES

    Thanks for your reply and letting me know you had the same problem.
  10. H

    CLK320 ENGINE STOPS AFTER ABOUT 10 MINUTES

    Thanks for your reply and adding to the CPS vote.
  11. H

    CLK320 ENGINE STOPS AFTER ABOUT 10 MINUTES

    Thanks for the CPS vote.
  12. H

    CLK320 ENGINE STOPS AFTER ABOUT 10 MINUTES

    Not sure about that, guess there must be a vent pipe somewhere. The filler cap is solid.
  13. H

    CLK320 ENGINE STOPS AFTER ABOUT 10 MINUTES

    The AA mechanic reported no error codes, but this may have been the type of scanner he was using.
  14. H

    CLK320 ENGINE STOPS AFTER ABOUT 10 MINUTES

    Thanks, looking on line that seems to be the next thing to try. Appreciate your confirmation that this may be the problem.
  15. H

    CLK320 ENGINE STOPS AFTER ABOUT 10 MINUTES

    Thanks John, unfortunately the fuel cap does not have a vent in it, that would have been a wonderful easy solution!
Top Bottom