-
-
Jjd24689 replied to the thread Wrong a/c condensor fitted.Great, thanks👍
-
JHi all, I stupidly replaced the a/c condensor on my w203 with the wrong one (A2035002154 rather than the correct A2035000854) and put...
-
Jjd24689 replied to the thread Engine bearings or possibly just a bad pulley?.The videos should all be working now
-
Jjd24689 replied to the thread Engine bearings or possibly just a bad pulley?.Thanks for the reply. I have uploaded another video where the noise can be heard a bit more clearly: It can be heard when the engine...
-
Jjd24689 replied to the thread Engine bearings or possibly just a bad pulley?.Any advice on next steps to get an exact diagnosis? Is it worth pulling the head to see what the cams and followers are looking like?
-
Jjd24689 replied to the thread Engine bearings or possibly just a bad pulley?.Same noise with belt off.. anything else this could be or is it looking like engine bearing issue?
-
JRecently my c220d has developed a rattle/grind coming from the auxillary belt area, from 8 seconds in: Any thoughts if this could...
-
Jjd24689 replied to the thread Is it possible to fit a strut with the wrong bushing orientation?.From what I remember when I changed it, I don't think I'll fit me hand around it. I was thinking I could apply torque from the top...
-
Jjd24689 replied to the thread Is it possible to fit a strut with the wrong bushing orientation?.So would I need to unbolt it from the hub to do this?
-
Jjd24689 replied to the thread Is it possible to fit a strut with the wrong bushing orientation?.I didn't realise it seated like that. So the rubber moulding with the fat and thin bit is free to rotate? Will I need to disconnect...
-
Jjd24689 posted the thread Is it possible to fit a strut with the wrong bushing orientation? in Wheels, Tyres, Brakes & Suspension.Hi all, I recently had to replace a broken front coil spring. I removed and re-fitted the strut assembly myself but had a shop change...
-
-
Loading…
-
Loading…