Justintyme's latest activity
-
JIt depends on the car you will be using it on. I discovered the Halfords 2.5 ton jack I had been using for years on many cars was...
-
JIt wouldn't have Stop/Start (a) because it's a C63 and they don't have it, and (b) because it's pre-facelift anyway and the Stop/Start...
-
JChecked the charger this morning and still the same so will bite the bullet and order a new one. Does the 2010 c63 have an aux battery...
-
JAnd change the brake fluid....
-
JLooks ideal half the cells are dead..... and the other half aren't doing that great, either.
-
JThat suggests the battery is totally ruined, to the point your charger thinks it's actually a 6v pack. Anything below 10v on a 12v...
-
JI have new tyres at home along with new rear suspension springs, new brake booster and other bits to put on. It’s due a b service and am...
-
JYou'll likely need new tyres... check for flat spots and for cracks (unless stood on axle stands). And check the brakes... seized...
-
JThe battery was brand new when I first put the car away. If it doesn’t work, it’s another £175 for a new one
-
JAthey, leaving a car stood for a year with the battery still connected is never going to end well no matter what battery conditioner it...
-
JThe battery is trickle charging at 0.8 amps at 6v and showing 6.8v on the charger. Will give it the next few days to charge it. Just...
-
JFully discharging a car battery usually damages it - you are likely to need a new battery. See how the charging goes and whether it...
-
JI kind of agree with you ZIP ^^^ I have all the necessary tools and (hopefully) skills to do my own ATF change but I just got my indie...
-
JTheres a few how too's,torquing the bolts to the right torque,is important.to be honest what a indy will charge to do this job IMHO it...
-
JOP , have you got a torque wrench that goes low enough on the scale for the sump bolts ? I think it's around 5 or 8 Nm. Someone on here...
