Recent content by Lucio

  1. L

    Presumabily NOX Sensors - ML350 Bluetek 2012 ADBLUE

    Hi Seth119 If you read my post at the top I have posted pictures of both sensors including the circuitry. They Do have 2 different part numbers: A0009053603 (Sensor furthest from the engine) A0009053503 (Sensor closest to the engine) They might be identical but they perform different tasks...
  2. L

    Which Gasket Set? W166 Oil 2012 Bluetec Oil Cooler Seal Replacement

    Morning All; Moving to my next job, replacing the seals on the W166 oil cooler, as it is leaking. I’ve done a lot o reading on this topic, basically the job is simple but to get to it, you need to remove most of everything that is seating on the top of the engine! That means new gasket and...
  3. L

    Presumabily NOX Sensors - ML350 Bluetek 2012 ADBLUE

    Hi All; First of all thank you for you help. Just wanted to close the case now by posting what I have done to resolve my issue. I have purchased the two NOX sensors from Amazon.de and replaced them. SCSN Nox Sensor Lambda Sensor A0009053603 A0009057100 LINK NSGMXT-Nox...
  4. L

    Presumabily NOX Sensors - ML350 Bluetek 2012 ADBLUE

    Hi all thank you, no service history! @Tramper did you just swap or did you have to reset it also? Thanks Lucio
  5. L

    Presumabily NOX Sensors - ML350 Bluetek 2012 ADBLUE

    Hi Guys Any here will be appreciated pls. Thanks Lucio
  6. L

    Presumabily NOX Sensors - ML350 Bluetek 2012 ADBLUE

    Hi All I have been struggling with an issue for the last few week with my wife's ML, as the MIL light switched on and the electronic display is warning that the car won't start in 400 miles! I have searched the web but not a lot of specifics on this topic to help and guide me to a solution...
  7. L

    Reasonable (cheap) scanner recommendation

    Hi Guys I have used vGate adapter (wifi) and read two faults: -P2BA8: NOx Exceedence - Interruption of Reagent Dosing Activity (Powertrain, Generic) -P2BAD: NOx Exceedence - Root Cause Unknown (Powertrain, Generic) I'm guessing I need to change both sensors! Thank you
  8. L

    Reasonable (cheap) scanner recommendation

    Hi all I have an issue with ML350 bluetec 2012 NOX sensors and I do not have a scanner to read the fault codes or reset the ecu. may ask your help in suggesting a reasonably priced scanner pls. Thanks Lucio
Back
Top Bottom