Recent content by mornin clatter

  1. M

    C270cdi alternator pulley

    Thank you for the reply, also i wanted to ask ,as i don't own a torx bit set, if this could be a good oportunity to get a set and the 33 teeth tool, instead of the combined tool. The difference that i have seen in the diescription is that the special combined tool has the torx length at 100mm...
  2. M

    C270cdi alternator pulley

    After checking on ebay, i have seen that the tools are separated in to 2 main categories, the ones that have just the 33 teeth spline and the ones that have the spline on the longer bolt, that is used to lock the alternator shaft in place (i think) in order to tighten the pulley. Thanks...
  3. M

    C270cdi alternator pulley

    Hi, i have recently noticed a 'new' noise coming from the engine :) . It sounded like the air filter box or the engine cover beeing loose and vibrating. After i realised that the noise is not related to the plastics, i could see the belt flapping and the tensioner moving. My first instict was...
  4. M

    OBDII Scanners

    If you are local to me, i would be glad to lend my tester. All the best.
  5. M

    OBDII Scanners

    As said above, the vast majority just go for the engine ecu stored codes, with no acces to other modules. My first obd was an autel, which surprisingly ,on my c270cdi, and a friends volvo v70 , had also acces to the auto gearbox modules. What i use now is a laptop with the delphi interface...
  6. M

    Injector leak (black death).

    Hi, thanks for the answer, can you tell me what solvent you have used?
  7. M

    Injector leak (black death).

    To be honest i would enjoy nothing more than to be able to do it myself... but it is something i have never done on cdi engines , only on older diesels (removing , not cutting a new seat)...so i am bit scared not to do more damage than good...i don t have a solution for removing the debries...
  8. M

    Injector leak (black death).

    Hi all, just discovered the injector leak while i was adding windscreen fluid, i could see a small oil like stain on the plastic engine cover, so i took it off, only to discover the first injector leaking....oooh the joys of life!!!! With the cover off i could smell the gases, but not from...
  9. M

    W203 270cdi auto noise

    Problem solved , it was just as Leabrooks said, the noise came from the exhaust joint, but i got off easier, as i only needed to apply exhaust paste, and no more noises. Thank yoh Leabrooks!
  10. M

    W203 270cdi auto noise

    If you don't mind , why is it necessary to replace the clamp, does it become loose ? So the cause is the pinholes on the mating surface or the clamp. Thank you.
  11. M

    W203 270cdi auto noise

    Thanks for the reply. As i was under the car and got someone to hold the revs to reproduce the sound i could definetly hear it coming from the area that you just pointed out. I just have to remove the clamp next time and have a better look at the exhaust connection. Did your car made a similar...
  12. M

    W203 270cdi auto noise

    The best way to check engine mounts? Just grab the engine and try to move it or is there any other way?
  13. M

    W203 270cdi auto noise

    HI panason1c, i checked the belt and pulleys and they are ok, that was my first idea as well.
  14. M

    W203 270cdi auto noise

    Thanks for the quick reply, i will have another look, and try to locate the clips.
  15. M

    W203 270cdi auto noise

    Any ideas would be greatly appreciated , i posted a youtube video with the noise, it was filmed while the car was in P. I noticed that the sound will occur no matter what the position of the gearbox lever, no matter if the car is rolling or is parked. As a rule it will start only after the...
Top Bottom