PR1
Active Member
- Joined
- Last seen
- Messages
- 61
- Likes
- 15
Latest activity Postings About
-
-
PR1 replied to the thread W124 230e lowered.He mentioned 215/35R18 on another thread -
I have spoken to a indie and they couldn't tell me how to do it, so are going to look when it goes fir a service on a couple of weeks of...
-
Hi I've tried the volume up and down when driving expecting instructions and pressing the mute button quickly and holding but to no...
-
PR1 replied to the thread Command NTG 1 aftermarket replacement do any really work?.Someone must have tried it? If not is there anyway to update the map to something newer than 2018?
-
PR1 posted the thread Command NTG 1 aftermarket replacement do any really work? in Electronics and Audio.Hi, I have the very outdated NTG1 and was wondering about replacing with something a bit more up to date, I understand that trying to...
-
PR1 replied to the thread Cill water drain plugs.Know the feeling lol
-
PR1 replied to the thread Vito V6 122 OM 642 Engine Failure.Anyone that helps you on an internet forum is only ever going to be an “internet mechanic” so might find the guy who can help the most...
-
PR1 replied to the thread How much approximately to replace a front coil spring on 2919mercedes e350 or cheaper to fit a used strut ?.I agree, the older types were much easier, when I had to change one on my s211 I just took the strut to local garage, they used a...
-
PR1 replied to the thread What injector size seat cutter should I use on my 2010 Mercedes eclass 3.0 ?.Same problem I mentioned in post 2, but resolved in a different way 😀
-
PR1 reacted to m80's post in the thread What injector size seat cutter should I use on my 2010 Mercedes eclass 3.0 ? with
Like.
The correct sized cutter in my kit wouldn't make contact with the face to be cut. I had to grind the shoulder off the cutter. I use a... -
PR1 reacted to Richteo's post in the thread What injector size seat cutter should I use on my 2010 Mercedes eclass 3.0 ? with Like.
If you're at that stage then yes, you'll need to recut the seat.
-
-
Loading…
-
Loading…
