Recent content by quantass

I own a 2013 Mercedes GLK350 (VIN: wdcgg8jbxdg006954). I'm still wrapping my head around what this Command APS NTG controller is. How do i conclusively identify what model # it is? That is, is it NTG4.5 or 4.7? From the photos below and my readings i believe i'm using NTG4.5. Is it possible...

I got the door seal to fit properly now. I opened the door and looked at the hinges. The hinge connected to the car frame (not the door), the top hinge, has 2 bolts. While keeping the door positioned with the car jack I unscrewed both bolts. I could see the door lower slightly. I then...

Hi George. Can you clarify? Are you referring to the bolts on the car frame (not the door)? Loosen those and push the car door inward (horizontally) then tighten?

wow, neilrr, great deductive reasoning. Yes, i do live in Canada. Thanks for the link!

Thats unfortunate. I do appreciate the detailed explanation, grober. I think i saw a replacement mirror on Ebay for $80.

Is the B-pillar the hinge in the center of the image with the black rubber surrounding it? So this can be moved horizontally inwards toward the car? Thanks

Here's a photo of my door attachment: So what you're saying is i should loosen the bolts at the very top and very bottom on the door-side (not car frame side), lift the door slightly, then tighten the bolts ?? For the record, the open door is located on the right-side of the image. Thanks...

Np, George. I am going to try the door lifting too. Thanks for the hijack. Saved me from asking the same question. Though i have no idea on how to start. So i open the door and peer into the space between the open door and the frame of the car. Identify the hinge and bolt and loosen then...

I own a 1991 Mercedes 190E 2.3. The driver side exterior mirror isn't positioning correctly after it was forceably bent in the wrong direction. I'm not so concerned with any electronic aspects of it as much as I want the mirror to be manually positioned for practical use. As it...

I own a 1991 Mercedes 190E 2.3. The front passenger door seal doesnt seem to be flushed against the door as well as the front driver door. There is a small gap between the thin lip and the frame of the car. The driver's side is perfectly flushed against the door; no gap. We had an...

I found the correct bulb. Thank you VERY much to everyone. All of you have made handling these problems SO much easier.

You guys are dead-on right! I've discovered that tiny bulb holder and bulb. Nice. At went to Canadian Tires for a replacement bulb but after purchasing what i thought was the right size, it seems the bulb is slightly too wide to drop deeper into the holder. Damn. CT has no other bulb like...

We own a 1991 Mercedes 190E 2.3 car. I'm having troubles getting this backlight to come on... the gear shift panel The backlight which illuminates the P/D/R/3/2 does not come on so it is difficult at night shifting to/from reverse/drive. I've checked the fuse box and there doesn't appear...