Recent content by remlap

  1. R

    front suspension on 05 ml270

    Thank you Jane 270ML will look into it
  2. R

    front suspension on 05 ml270

    What can be done to stiffen up the front of my ML270 as it bounces over rough ground, any suggestions welcomed.
  3. R

    wiper sensor

    ml270 cdi se 2005 wiper sensor not working, waiting for a new screen, but would like to get the sensor working before new screen fitted. Anybody got any ideas
  4. R

    270cdi, new manifold or deflap?

    Make sure the connector on the end has not popped off, as that will cause that trouble a press on plastic ball connected to a ball socket
  5. R

    S600 Coupe (W140) new wheels before and after

    Wheels look great, looks a different car.
  6. R

    W163 2000 ML 270 CDI brakes stuck on (intermittently)

    When i changed mine about a month ago i found that the new pad back plate was a smidgen bigger than the aperture they fitted into, I lightly ground the edges down so they slipped in easily, as the pads need to move back freely to release the disk. If yours went in quite easily i would suggest an...
  7. R

    W163 2000 ML 270 CDI brakes stuck on (intermittently)

    When i changed mine about a month ago i found that the new pad back plate was a smidgen bigger than the aperture they fitted into, I lightly ground the edges down so they slipped in easily, as the pads need to move back freely to release the disk. If yours went in quite easily i would suggest an...
  8. R

    Service

    To set the lights you will need an electronic fault finding tool, which you can also buy on ebay, anything from a tenner upwards, plug this into your sixteen pin socket which will probably be under the drivers side, and follow the instructions
  9. R

    Service

    You will, but you can buy one on Ebay for about 8 quid, In the filter box will come 3 o rings which will replace the ones once the filter has been removed, Many will tell you to change the sump bung washer, i dont feel its a need as i have never yet had a sump bung leak, just make sure it comes...
  10. R

    Joining the MB club after buying ML 270

    Thanks PaulG, will keep that in mind.
  11. R

    Kickdown Switch Adjuster

    Hi ya Jane would you have the kickdown switch part number handy, as i have the same problem thank you
  12. R

    Code readers

    Morning Stevellew, I have a fault finder i brought from Ebay mine was only about £20 quid it is a D900 version 2013. the numbers on the front are EOBD/ OBD11 live data, i have not used it on my MB yet but have used it on my previous Ford and found that it worked well, CD included with error...
  13. R

    Joining the MB club after buying ML 270

    Morning all, I have recently purchased into MB driving by acquiring an ml 270, My first thoughts when driving over sleeping policemen was that the front shocks needed replacement. I quickly sent off for two shocks, and looked for help on the net, on how to fit them. I jacked the car up and...
Top Bottom