-
-
RETIRED replied to the thread C270 CDI 2004 NO START.Borrowed a diagnostic tool and found the rail px was 350-400 bar so not a diesel px problem. Showed fault code p1354-064 for... -
RETIRED replied to the thread C270 CDI 2004 NO START.Thanks, I have managed to get a diesel bleed kit so will use it to bleed the diesel from the tank into the filter. I spoke with a...
-
RETIRED replied to the thread C270 CDI 2004 NO START.The pipe I replaced has the tee port you refer to so hopefully should be leak free. I can't see any air bubbles in the pipes to and from...
-
I have done some preventive maintenance by replacing the diesel line o rings at the pre delivery and main fuel pumps and whilst...
-
Good Day All, I am Pete from Bucks with a C270 CDI which I am trying to keep going until ULEZ is extended to outer London I have done...
-
RETIRED replied to the thread Inlet port shutoff motor m55.Thanks gents, Resistor fitted and as stated the spring hold the arm in the open position
-
Hi, I am in the process of bypassing the inlet port shutoff motor M55 on my 2004 c270 cdi. Once I have put the 4.7 ohm resistor in, what...
-
-
Loading…
-
Loading…