Recent content by stoneage

HI, All . while changing my cramshaft oiler tubes O rings on my 91 SL 500 one off the tubes snap part no;1191870087 .Has any menbers got a spare one for sale or know where i can obtain one,all the new one the dealers can supply in now made of cheap plastic. S-age keep safe all

HI,Just read your post, i am having the same issue as you had on my 91 SL,DO you know how your MB diagnosed your fault component and how did he bypass it? stay safe S-age

thank you , gave the part number to my local dealer. and they supply me the correct part, your a star,

thank you ill now return to main dealer with these numbers,ill let you know if they can find this part,

Can any help me with this strange part number? I run a 91 500 SL WITH THE M119V8 ENGINE and my rocker cover breather hose has gone brittle and is leaking .Stamp on the hose is number 119042082/1190941982 and my main dealer cannot find these numbers, this hose sits on the near side bank of the V8...

glad every thing sorted, ill ask some one from .org the usa forum to post on you tube,enjoy this superb car keep in touch

HI,before you send this unit off, have you tried clearing the fault codes, this is done by means off the 16pin socket under the n/s off the hood, i can send you this information, this socket can be used to check all the equement on this modle and cancell any fault codes. PM ME YOUR EMAIL. YOU...

ALEX, it list all merc. dia. ports from 8 to 32, must addmit dnt know how to read from the 32pins, but show you how to connect and read a code ,reader, if it can held any menbers ,,ill send it on

HI, HAS YOUR CAR GOT THE 16PIN DIAGANOTIC SOCKET ON THE N/S UNDER THE BONNECT?THERE IS A SIMPLE WAY TO CLEAR THE FAULT CODES ,THAT WILL SUSPEND THE OPPERATION OFF SOFT/ROLL BAR, HERE IS MY EMAIL,[email protected],email me yours and ill send this infor,to you

HELP, DOES ANY MENBERS KNOW WHERE I CAN OBTAIN A WIRING DIAGRAM FOR MY SL./91 AND FOR A 96 S CLASS, REASON FOR THIS ,MY SPEEDO HAS STOP WORKING AND IVE OBTAIN ONE FROM A 96 S CLASS, ALL THE DIALS ARE THE SAME,AND THE WIRES LOOK THE SAME, DOES ANY KNOW IF THESE PARTS ARE INTERCHANGEABLE?:confused:

HI, all, got a few sl spares, door glass, roll bar switch and roll bar controll box indicator arm roof pum relay, set rear mudflap,and n/s off/s platic door spearkers holders and rear light cluster bulb holder :thumb:

HI. Lars-mad,fuses are all ok, ive tried to disconnect the 2 multi connector thats attach to infrared radio controll and 2 a little white box,but i cant figure how to get these connection off?{out} stoneage

HI, LARS-MAD. again thanks for your reply, ive tried your suggestions,and the problem still here,{mobile camera show key fobs transmitting a signal,and ive syncronised the keys as instructed by owner manual]

HI,thanks for your reply, ill check the keys out today,and let you know if this cure the problem,

HELP NEEDED!!!! on my 91 sl I can lock the car with the key but the remote locking wont work by pressing the key fob.If I put the ignigtion switch in poss.. 2 then the remote works with the key fob, I've been told to disconnect the multi pin sockets to the modules in the boot and clean contacts...