Recent content by The Dent Guy

A shout out to Auto-mobile.... I had two remapping companies remap the ecu and neither tripped any codes on star. But finally put the standard map back as suggested and then put back on star to find the egr and the dpf differential pressure sensor were faulty. So both changed and the dpf...

Update: I have removed the crankcase breather pipe and the induction hose from MAF to turbo and the electronic part which I now know to be a heater for the breather pipe. All parts coated with a film of oil but no sludge or blockage at all. Thoroughly cleaned and reassembled - this...

Can a blocked crankcase breather cause limp mode? What is the purpose of the sensor in that same breather pipe which attaches to the turbo induction main hose? PS that main induction hose slips off the turbo with ease. I guess it needs tightening and a new orange seal.

Can the electronic actuator be faulty even if it appears to be working, regardless of whether in limp or full power mode?

Are those codes related to the DPF when put back to factory map? Im assuming the DPF was physically removed (ie. cut open and emptied, then welded back up like mine).

Are you meaning the intake pipe on the turbo? Or intake manifold? Added photos of gunge on the sensor on the crankcase breather. Also I noticed the intake pipe off the turbo slid off easily. ps. What does that sensor do... temperature? or pressure?

Hi guys - im reigniting this thread as I appear to have the same problem. However, my car is the facelift 2004 C220 CDi, which has minor differences. That being - no vacuum pipes.... or so I think.... ie it has the Electronic turbo actuator and EGR. Been to 2 indies with star machines and...

I was looking on here (1st time in ages) to see what the problem is with the glow plug light coming on and off whilst driving at full temp... seems i should just live with it like you have. Bad luck with the gearbox... ouch! Also, i had a re-map but mine is the 150bhp facelift so its a tiny bit...

Think that only applies if you have comand - doesn't work with Audio20. But, i could be wrong :dk:

Nokia N8 with the SAPv2 - its official, IT WORKS !! + it downloads contacts from the sim card like it did with my nokia 5800 Thanks for everyones advice - i got the setup wrong, cos tried to do it from memory.

Yeah - the V2 only reads the SIM contacts on my old phones too - always has done, which i didn't find too problematic. Think i will give it another go after xmas and post back here with the results. raymont... interesting you actually got it to pair.... VERY interesting - thanks for that post.

Cheers for that Richard - i didn't know a V3 existed. If Viseeo MB-2 is confirmed to work with the N8, i will have to weigh up which is better.... ie. the use of the external antenna with SAP v3 ... or, the ability to receive SMS texts and photo messages when connected via Viseeo MB-2. One...

Cheers Richard.... Do you know if any of the viseeo units work with the N8? Might be easier all round to just buy one if it does work.... and sell the SAPv2 Cheers

Hi guys - wonder if you can help. I have a SAP v2 bluetooth puck working with my nokia 5800xpress touch screen and have always had nokia phones as they all seem to pair fine and work properly...... also liked that it uses the cars own ariel for what i assume is better reception. However, i...

I had the same dilemma not long before Christmas and decided to go for a Samsung 40" 6 series now priced at £700. Below is the model i bought and is worth every penny in my opinion. Apart from being an attractive looking piece of kit, it has the advantage of 2x USB ports for viewing pics &...