Thanks guys for your inputs.
Checked the connections and all seem good.
I believe the brake light switch is good because when I press the brake pedal, the shift lever makes a faint click. So, I believe the communication between the switch and selector module is ok.
I heard about a plastic...
Having some issues with my shift lever.
Noticed that my shift lever became harder to shift out of park until today, where it came stuck.
When I switch off and switch ignition again, am then able to get the lever out of park.
I have a diagnostic tool and had fault code P1925 - “ Drive...
Actually its a W220 S500.
Other than brakes, I was thinking that maybe noise is coming from the flex disc or shaft bearing.
But replaced those parts already a few years ago and also did a recent visual inspection. The parts looks still good to me.
So, I am getting a roaring noise when braking from high speed. It sounds just like a broken wheel bearing. The noise comes from the front of the car.
When I stop braking and let the car slow down on its own, the noise goes away.
So I replaced several parts but was not successful at...
I am having a misfiring issue with my W124 230E.
The car has not run for 2 years. I have changed the oil, air filter, oil filter, coolant till now.
I have taken a small video which could help diagnose the problem.
Every time I give gas, there is a misfire but as the engine gets warm...
So, am having an issue with my W220 that has the 7G gearbox.
Rpm tends to drop each time I give it a bit of gas while cruising. Then picks up speed as normal. Please see video for reference.
I think that it may be related to the torque converter.
Would be great if I could get...
I have an S500 (W220) and am hearing faint clicking noise on acceleration. Would be great if I could get some advice on what may be the cause of this noise. Please find below all the details relating to this noise:
- Faint clicking noise on acceleration only
- Noise goes away as the...
Thanks everyone for helping me out. I will send the cylinder heads to the machining shop as advised. The cooling port in the photo looks very different to the others. Do you think that it has been worked on in the past?
Actually the cylinder heads on my S500 are still good.
The heads I...
So, I bought used cylinder heads for my M113 engine on ebay and they came today. I do not have much experience on how to check if they are in good condition or not but I believe to have noticed some flaws. Would be great if anyone could check if the dents, scratches, etc are...
I have a 2004 S500 and performed a diagnostic through icarsoft.
Got code P200C-064 but the details are not found in the diagnostic tool's database.
Tried to search on the net but could not find the definition of this error code.
Would appreciate if anyone could help me out