There are repair techniques we use regularly on that engine.
Often we use a Timsert repair method to bring it back to standard
The other a field service method I developed using a S/S grub screw, introduced into parent head holes.
Threaded 7/16 UNC on the exterior, the injector hold down...
Here's some info
Shoot me a picture of your fuse box and I will try to identify it .
I have most MB diagrams & schematics for NAS spec models but not your UK /Euro platform.
Well certainly have a go!
From the fault codes you have posted these might be useful then again not, as MB tends to have slightly different fault codes than the generic used by the mainstream brands !
P2503 Charging system low
P220A Nox supply voltage low
P2401 Emission controls low voltage...
A tribute to this officer killed in the line of duty.
I have three family members serving as UK police officers, two nieces in Thames Valley, and one nephew now with Gloucester police as a detective sergeant.
'Of course as with most police officers, they have families ,this particular New...
Yes I would tend to agree with that statement .
You must realise the US makes agreements and treaties with other countries, but at the same time follows its own agenda when necessary .
The UK is seen from these shores as a junior partner at best & when convenient.
Remember 1945 onwards was a...
I have read your post.
Normally the injectors are held down with 6x1 mm special bolts by MB.
Yes I/We often see them torn out for all sorts of reasons.
The immediate fix is a timesert insert which brings the thread back to 6x1 as per std build.
Should the damaged hole is too wide to accept...
One thing about us guys.
We move from one stage of boyhood to another throughout our lives.
Once asked what hobbies do I have? I stated my wife and my family are my real hobby .
And, with all that stated there are some things that stir the phagocytes.
They usually revolves around machinery...
I am more worried about them being intoxicated:-
Aurora Colorado police supposed to be some of our finest .
A fine day out with beers!! 👿
I have owned two V8 Yank tanks in the UK & those were in my late teens as a youth !
So a long time ago now, but think 1972 onwards..
The first was a 1957 Ford Fairlane Skyliner, pastel pink over mid grey. Powered by Windsor V8
The second was a 1772 Chrysler Cordoba in white. powered by 318 V8...
Well I have been watching and listening this.
Remembering a very wet ride back to a motor vehicle tech college in Cologne on my then gold Honda 750 four.
It was 1972, and Willy Brandt was slated to be the next chancellor . His posters were everywhere in the Autobahn truckers cafes
An unpopular viewpoint to some.
The US has huge influence within the halls of established power in the UK.
Its influence tentacles permeate throughout every corridor of power within the UK's ruling society including politics & law.
To preserve what is often called "our special relationship" the...
Oh customers and tires (tyres)
I never tire of it!!! :D
In spite of recent tire upsell trends & trade recommendations, I /We tend to skirt the issue at service intervals, merely bringing customer attention to tire condition & the need for "new rubber" when appropriate .
Its a bit like...
Bejeezus two months !
Like running into an old girlfriend you haven't seen for awhile!! (Ow hoo dangerous !!!!):D
An oil change?
Not generally necessary, BUT with potential fuel dilution/ bore wash, when WAS the last time it had an oil change before all this fiasco blew up? :oops:
One of the fundamental issues today is steel slab production.
Only a few countries produce steel slab these days , China is the world supplier and Turkey isn't far behind them.
There is in fact a world shortage of steel at the moment, dominated by Chinese production shortages & supplies of slab...