Search results

As long as I have the data, I'm not worried about the job. I am a design engineer by trade with a complete workshop designing and building amusement rides and other trailer based mobile turntables. I have done my fair share of rebuilding industrial machinery gearboxes and slew rings along with a...

Thanks 190. I have just worked out how to use the tool above. Fantastic. My diff is actually out of a manual according to the data. Next step I need parts

I have just been under the car with the wire brush to find the part number of the diff. 0167306 3.64 Am I correct in believing that this is in fact the wrong diff ? Is it for a 190D manual ? Can I rebuild it with the correct ratio ? Where can I get all the parts from. Crown wheel, Pinion...

Yes. Usually on motorway or dual carriageway

Thanks for the reply. At just over 3000 rpm the speedo is reading 70mph. This is inline with what you posted. The gearbox drive is after the torque converter and is driven from the final drive in the gearbox. There is no excess slip from the torque converter either. The problem is the actual...

I have just parked up my S204 C220cdi. 200,500 miles. I bought it with 94,000 It has been one of the best cars I have ever owned. I used to do all my own servicing and repairs, but time constraints with a new venture has put a stop to this. I recently had a number of faults all at the same time...

I recently bought the above car. The issue is I suspected the Speedo was incorrect. After driving it for a few days I ran my sat nav for speed check. The car reads 75 and sat nav says 65 the engine is also running at around 3000rpm. Tyre size is 185 65 15s which is correct. I therefore have come...

Update. Fully tested starter relay. Seems ok. Relay can be felt operating when key turned to start position. I presume this rules out ignition

Going to get underneath today and carry out tests on starter. The thing that is puzzling me is that it was actually running. I was slowing for a junction when it cut out. All the pre start ignition functions are working fine. I’m wondering if there is something preventing the starter kicking in...

Not convinced it’s the ignition. Only ever had an issue when turning it to the start position. Why would cause it to cut out? Currently, there is a small volt drop when you turn it to the start position so something is happening. Would it not show up on diagnostic tool?

Yes. When you insert the key you can hear the solenoids working, steering lock releasesand the ignition “on” works as normal. On the odd occasions over the last 3 years when the car wouldn’t turn over with first turn of key everything else still worked.

I have same car. Also had dpd problems. Had code deleted a few times and it kept coming back. Took it to a local tuning guy. Had dpd removed and Ecu remapped for a few more horses and so it wasn’t looking for the dpd. I had him sort out a small coolant leak while he had it. That turned out to be...

Whilst slowing to a junction earlier today. My dash lights all lit up as if I had just turned the ignition on, the engine cut out and I couldn’t restart it, I.e. it won’t even attempt to engage the starter. There was no clattering, banging or anything, it was as though someone unplugged...

Hi does anybody know where I can download a manual for a 2011 c220 cdi. I have a major water leak somewhere on the right hand side of the engine. I believe it could be the egr cooler seals. but would like a manual before I tackle it.

I will try these suggestions later and report back. USB is only 8Gb and formatted in FAT32

Old topic revisited. Ive got my music on usb sticks and find it great with artist, album, tracks. Seems far more organised than using my ipod in my other car. However although I have converted everything to mp3. and made sure artwork is 300 x 300 or less I still cant get it to display. I have...

tried that one it seems the firmware might have become corrupt. Don't know what to do. does anyone know of anybody who can re flash it or service exchange it.

Anybody help :confused:

I have just bought my c220 which has a becker map pilot in the glove box. In my infinite wisdom I decided to remove it and update it. I initially did a back up and went through all the prompts. Until it got to the point where it asks you to press the reset button. This is when everything...