Search results

so the eco button on my w212 is green the engine switches off at the lights and then as I remove foot from brake it restarts but almost immediately stops again and clock starts reversing on dash .im not able to restart the car and im stuck at the lights for 10 minutes after 10 minutes it will...

I have a E250 w212 2012 and a second front wheel bearing has melted down in two weeks so decided to replace hub assembly ..does anyone know if im able to use the hub assembly off a w212 300 hybrid from 2010 ..they look identical but would rather be certain before I purchase it .thanks

ok but then I won't have access to the fuse panel in the boot......is there a way of making the car think the boot is closed ...

how do I do that without opening the boot to check the battery ..wont opening the boot wake the system up again

Just to clarify ..I connected my multi meter to the disconnected negative battery terminal and cable ..it starts by reading 10 a ..then will drop down to 1 when I pull those two fuses The fuses relate to antenna ,tv, central locking via the key because the switch on the dash still works..tyre...

I pulled the two fuses and the amp reading dropped to like 1 …just wondering if this car comes awake or doesn’t go to sleep….trouble is I carnt use my key to lock the car with the two fuses pulled and no radio or sat nav

I've narrowed the drain down to two rear 7.5 amp fuses F3 and F8 in the boot .. 3 TPM [RDK] (tire pressure monitor) control unit PTS (Parktronic) control unit Navigation processor TV combination tuner (analog/digital) 8 Left antenna amplifier module Alarm horn Alarm signal horn with...

alternator regulator burnt ..out replaced alternator and carrie3d out parasitic battery drain test ..thats what the real problem is ....pulling 9 amps when shut down is dead within 24 hrs...

I have had suspension failures but I replaced the o rings on the tandem pump, and have only ever replaced one strut for a used one,£140 off ebay ....replace cf 11s fluid every 3-4 years for what ever the cheapest available is ..sat outside now for three weeks unused and all 4 corners still up...

My 2005 cls 500 has parasitic battery drain I’ve been able to narrow down to the 2 x7.5 fuses located in the boot ….they are for F003 tv,tunner tyre pressure parktronic and navagation processor F008 left antenna amplifier module alarm horn alarmsignal horn with add.. battery inclination sensor...

I have a cl 500 year ...2000 it’s done 312000 miles and shows no faults ..those engines where also fitted to the cls 500 5 years later ...it is still returning 28 mpg up and down to Taunton from Abergavenny....about 200 miles total....just a superb piece of machined madness ...

my 2005 cls500 has big red light on ,multi meter not changing from resting voltage when I check battery ..is there a way of testing other parts or wiring ,is there a fuse as replacing alternator is not easy...what else can I check before I replace?

I have one

my 2000 mercedes w215 CL500 ...308000 miles , lights on driver side uk have all failed ..the bulbs are good .....how can I check wires and is there a separate fuse , front passenger left side is fine and all rear lights good including mirror indicators ..any help would be greatly appreciated

how can we move this Thread to the right section please..

I switched out the steering column squib which healed all the problems and I reset the airbag as you have to remove the steering wheel to access the squib .....a lot easier than I thought it would be. the squib cost me £60 on ebay ..real result.. I might add that I was able to plug in my...

So I looked at the faults stored and ordered in a new steering squib with gear selecter stalk,speed limiter Stalk and indicator, washer wiper stalk Removed steering wheel and fitted this squib this fixed the problem and I was able to wipe all previous faults .. however I’ve not been able...

the main battery is a Yusa YBX5019...100ah 900a..does that sound right ..it has eco start

these are the fault codes that all came up in one go

I charged the battery up overnight and car starts without any problem but still throws all the signals