Search results

  1. Robbarr88

    W124 M111 960 fault codes.

    Mine was a E220 1994 model with CAT also, im hoping once i get home i can get the bits fitted too it and hopefully solve the problem
  2. Robbarr88

    W124 M111 960 fault codes.

    Thanks Grober!! That confirms the codes thanks again...Rob
  3. Robbarr88

    W124 M111 960 fault codes.

    Hi Guys. So i made one of the blink testers today for the mercedes to try find out the fault codes i used port 6 in the 16 pin port. My cars a w124 e220 m111 960. I got the following codes and i was wondering if someone can confirm that iv got the codes correct i used the fault codes from...
  4. Robbarr88

    Mobile electrical specialist east yorkshire area

    Hi Guys. Can i anyone reccomend a mobile electrician in the Hull east yorkshire area for a misfiring mercedes W124. Cheers. Rob.
  5. Robbarr88

    Another misfire thread W124 M111 2.2

    Great stuff thanks again!!
  6. Robbarr88

    Another misfire thread W124 M111 2.2

    Just for reference can anyone tell me where the central locking vacuum feed would be isolated? The cars been fitted with electric remote central locking - so best to check the old unit has been isolated and not open ended, thanks again
  7. Robbarr88

    Another misfire thread W124 M111 2.2

    Cheers optimusprime think thats going to be the next job replace 100% of the vacuum lines just to eliminate that as source of a problem. Thanks again.
  8. Robbarr88

    Another misfire thread W124 M111 2.2

    It was a refurbed unit from a reputable rebuilder who i sent my old loom and then repaired, but il check like you say and have a good look, willing to try anything at the moment! Cheers wrdcc01
  9. Robbarr88

    Another misfire thread W124 M111 2.2

    Or possibly throttle body idle control??
  10. Robbarr88

    Another misfire thread W124 M111 2.2

    Hi Guys, bit of an old thread resurrection here. But unfortunately the problem lives on, so since the thread started the car has now had the following items fitted. New loom New HT leads and plugs Cat removed (to see if was blocked and refitted) New fuel pump and filter. There is however...
  11. Robbarr88

    Another misfire thread W124 M111 2.2

    Thanks optimusprime, i will do its been nut and bolt rebuilt, loads of welding, hence been stood, once its painted and back on road il be taking it for a good run :cool: thanks again!
  12. Robbarr88

    Another misfire thread W124 M111 2.2

    Thanks Grober. im back to work tomorrow so when i get back in a few weeks il check that out, i tried uploading a video but it wont let me due to the size.
  13. Robbarr88

    Another misfire thread W124 M111 2.2

    Update 18.07.2020 - So fitted new plugs, HT leads, removed exhaust and checked CAT for obstructions, changed fuel filter,....and still not running right, the car now idles roughly but every now and then theres a pop within the inlet manifold. The car has now done 195k so im starting to think a...
  14. Robbarr88

    Another misfire thread W124 M111 2.2

    Cheers grober! Just ordered them 👍
  15. Robbarr88

    Another misfire thread W124 M111 2.2

    Thanks for all the advice guys, ordered some new plugs to make sure there correct (they've been in since i bought the car) and il check the cat and lambna sensor as well ....Thanks again
  16. Robbarr88

    Another misfire thread W124 M111 2.2

    Thanks optimusprime, so iv replaced HT leads no joy. But its idleing on and off, so sometimes it will sometimes wont, what we did notice is the CAT is ridiculously hot even after 10 mins of idle? We've checked all the leads, coils etc and now starting to think it could possibly be a sensor...
  17. Robbarr88

    Another misfire thread W124 M111 2.2

    Thanks dodipops, i dont think it does have the amplifier but it check the basics hopefully something simple, thanks again
  18. Robbarr88

    Another misfire thread W124 M111 2.2

    Hi everyone. I have a 1994 W124 and iv recently fitted a new loom, the car hasn't been ran in about 6 months so came to fire it up and its started but running very lumpy. Whilst the car was in storage, it had been parked in a terrible place which has leaked water into the top of port 3 & 4 i...
  19. Robbarr88

    W124 Brittle loom.

    Hi Guys. Just wondered if someone could reccomend someone who did reconditioned or new looms for a 1994 W124 e220 engine loom 4 cylinder. Unfortunately mines suffered from the dreaded brittle loom and think its beyond repair, any links or advice as to were i can find one would be great. Cheers
  20. Robbarr88

    W220 boot hinge spring

    Hi guys. I just wondered if someone can point me in the right direction for the hinge springs L&R that link with the hinges for the W220? Mine have corroded and snapped over time. If anyone has a link or mercedes part number that would be great. Thanks. Rob.
Back
Top Bottom