Search results

  1. M

    W212 NTG 4 to NTG 4.5 Retrofit

    3 grounds and 2 power then CAN lines so it should pinout (1-ground,2-power, 3-not used, 4 CAN L, 5-ground, 6-power, 7-ground, 8-CAN H) this is for the 8 pin connector on the W204 facelift screen. Is the Bluetooth built into the facelift/NTG 4.5 HU or is there a separate module?
  2. M

    W212 NTG 4 to NTG 4.5 Retrofit

    Figured it out! Pin 4-CAN L and pin 8-CAN H.
  3. M

    W212 NTG 4 to NTG 4.5 Retrofit

    Swapped to facelift dash board! Car had command NTG 4.0 originally so I just swapped the CAN L/H on the 12pin connector and some microphone inputs to mirror the NTG 4.5 pin out. The screen did power up for a brief second but will not anymore. I’m out in the USA. Thanks for your help!
  4. M

    W212 NTG 4 to NTG 4.5 Retrofit

    just to make sure the screen 8 pin connector should pin out (1-ground, 2-12v, 3-CAN L, 4-CAN H, 5-ground, 6-12v, 7-ground, 8-not used)?
  5. M

    W212 NTG 4 to NTG 4.5 Retrofit

    I have the black wire (CAN L -pin 6),black/wht wire(CAN H -pin 12)...
  6. M

    W212 NTG 4 to NTG 4.5 Retrofit

    Anybody have a pin out of the NTG 4.5 screen? Mine turn on for a few seconds and will not come on. Already swapped CAN L/H on the 12 pin connector and the 8pin connector is recieving power/signal.
Back
Top Bottom