Search results

  1. P

    Heater Problems

    I have a 200te RHD, I cant get the drivers side of the heater to work. The Bi Valve is ok, and the pipework seems to get hot, but the drivers side blows cold, the passenger side is nice and warm. Am I missing something? is there a method of bleeding the heater?
  2. P

    Freezing my xxx's off

    I have a 200te, in the recent freezing weather the heater is not working. I have forced water into it using the garden hose, but there seems to be a lot of resistance there is only a trickle coming through, even with the bivalve open. Is there a pump in the system somewhere, there is certainly...
  3. P

    Veg Oil

    polymerisation Just a short note on what can happen to the engone oil when running on veg oil. It happened to me, took a rebuild to get the jelly out of my engine!!!! ALL diesel engines have a certain amount of fuel to engine oil contamination to a greater or lesser extent dependant upon...
  4. P

    Gutless W124 200te

    Firstly, thanks for all the advise. I had a good look at vacuum lines traced them throughout the engine bay, found three leaks. One was on a chamber hidden within the front wheel arch, one was a rub through, the last was on the EGR under the inlet manifold. Took the car for a thrash up the M4...
  5. P

    Gutless W124 200te

    Ok, done a few tests, found out that pin 3 is the DTC output on the diagnostics port, I have a reading of 30%, which points to the temp sensor. Does anyone know what the cold resistance the 4 pin temp sensor should read? mine is 1.4K ohm regards, Paul
  6. P

    Veg Oil

    Just a note on using supermarket veg oil, its still Illegal!!!! The law states that you have to be a fuel producer to be tax exempt. ie: you have to be making bio diesel, or converting waste oil to fuel, if you're buying it retail then you're not producing it. regards, Paul
  7. P

    Gutless W124 200te

    I have a 1992 200te which has become really gutless! It starts first time every time, dosent burn oil, has recently had new dist cap, rotor arm, leads, plugs. It seems hesitant when pulling away, it dosent miss fire, just hesitates. it is also overheating even with the stat removed. There is no...
Back
Top Bottom