Search results

Thanks for your help mate As per your pics The main 12v is from the thick red wire. The the switching ground must come from the thin brown wire in the green plug I got my fronts done Just hoping the rears work the same too ;) Thanks again Who needs SCN coding eh ;)

also where is the black wite going from the light As that pic shows a blue and a black wire But on the connection pics its changed to a brown wire Is this correct ? Thanks

How is this done Im sure when i went into door module there was no options to enable puddle lights Ive read the door module needs to be told via the front sam Ive seen a couple of options in the adaptations stating Parameter entrance lights And Parameter indoor light external organisation...

Out of curiosity What are you connecting them to ? Thanks Dave

Has anyone got coding procedure ?? Ive read the front same sends the signal to the door module My new cards came with all wiring for the puddle lights so all good there Nothing illuminates at all Thanks Dave

Hi guys My w204 keeys popping this fault up usually once a day Diagnostics has 2 fault codes in the ecu Fuel pressure exceeded Fuel pressure too low Strange to have both ! So after a bit of digging about me and a friend changed the fpr circled at the top of the rail. The car was warm when we...

Hi mate I have exact same issue Did you get this fixed ? I have 2 fault codes too hig and low pressure ones Please see pics above. Thanks Dave

No one able to help out here ? Ive seen a 2010 model on ebay Does anyone know how to code them in ? Thanks Dave

May be the obvious But have you checked the power steering fluid reservoir level ? Dave

W204/212 ESL repairs Key not being accepted and steering lock not coming off ... result= non running car. I can repair this for you Sometimes its just the motor thats at fault but if its a complete failure then the ESL will deactivate itself and basically its a new one and coding from main...

Hi guys My command got the dreadded disc unreadable error So i installed a new laser Upon rebuilding and trying in the car i put a cdr in with my selection of tracks just to be greeted with the same error message Im going to try an original music cd in shortly see if it plays that...

Hi guys As per the title Can any coding be done to make windows go down if i hold unlock button And up if i hold lock button ? If not oh well If so can you point me in the right direction please ;) Thanks Dave

Are the initial chassis dimensions not the same ? With the other bits bolted on making the c63 wider ? Im just looking at ideas ive not committed anything yet Insurance and taxing ill deal with if and when it comes to it. Thanks for the reply Dave

Hi guys ive been offered engine and running gear for a c63 My car is a 2008 W204 Donor parts are from 2013 W204 Does anyone know if i can do a powerplant swap if i change all the other bits to go with the engine? Obviously i know its going to be a big job Fuel lines/tank/ etc Just...

thanks for your pointers dave

Hi richard I installed the wiper stalk module It was plug in an away it went once wheel was connected Wheel fully works Airbag module is here tomo What do i have to code in as i spoke with a mercedes tech today and he said i only have to code the steering column control module ! Thanks Dave

hi guys looking forwards to reading and contributing to the forums dave

Here is another pic Dave

Hi guys I just bought a new wheel and as you can see by the pics it came complete with Steering column too This also has the speed limiter and cruise control stalk. So my question here is can this be easily put into my 2008 w204 ? I have star so not afraid to do some coding ;) Id...

Sorry to bring up an old thread but i belive the front sam just needs a bit of coding to tell it there is a different wheel on there Ive just bought a new wheel too It came complete with steering column too Ill be on the search now on how to code the buttons in Dave