Search results

  1. D

    W220 S500 park brake adjuster

    Cheers will try this at the weekend thanks for advice
  2. D

    W220 S500 park brake adjuster

    Hi, Recently bought a 2000 S500 which has had new discs/pads all round and rear park brake shoes fitted but I have no park brake, the pedal goes all the way to the floor. I've checked the rear shoes and adjustment all ok and the cable pulls the adjuster at the rear forward . Is there any way...
  3. D

    s500 rear climate control

    Hi I've got a 1999/2000 s500 lwb which has seprate controls in the rear for the climate control. Until the weekend they worked as they should blow hot and cold on each side but now they only blow hot air even when turned to the coldest setting(on both sides). The front operates as it should...
  4. D

    E320 cdi vibration

    Hi Dieselman, sorry not been on line for a while I've been working away and never got a chance to thank you. You were spot on n/s engine mount had collapsed, changed both and huge improvement. The only thing that is happening is when normal driving its great super smooth but when it hits a hill...
  5. D

    E320 cdi vibration

    Hi can anyone shed some possible light on this problem. My 2002 e 320 cdi developed a strange vibration when accelerating hard between certain revs. Got the car back home took the cover off the engine a I had 2 injector seals gone. Got seals done but i now have a vibration when the car starts...
  6. D

    Vacuum and limp mode

    Hi, I've been having an on-going problem with my E320 cdi W210 (2002) model. Original problem was no boost, hard acceleration or kickdown car ran ok until I switched it off then limp home mode. Got codes read , read Maf and EGR. Got new maf from merc and cleaned out egr valve which was...
  7. D

    Maf Sensor

    sorry i should have said its a 2002 320 cdi e class, When you drive the car in the morning its ok drives perfect whenever you stop switch the car off and go back to drive it 10 - 20 mins later sometimes even after a few minutes the car drives but wont exceed 3000 rpm, no kickdown or hard...
  8. D

    Maf Sensor

    Hi, Replaced my MAF sensor today and cleaned the EGR Valve and vacuum pipes. The original problem was car was not accelerating hard, would drive ok but wouldn't exceed 3000rpm. Do you have to reset the computer after the new sensor is fitted because exact problem still exists.
  9. D

    Climate control

    Hi, The blower on my W210 E320 cdi has started playing up. It's a 2002 model and has climate control, sometimes it blows on every speed setting and sometimes it doesn't. Yesterday it stopped working all together, when I went over a speed bump it came back on but as it was intermitting...
  10. D

    air conditioning

    Thanks for all suggestions, Andy thanks for the link it solved problem and air con is now freezing cold. Derek
  11. D

    air conditioning

    Hi, I've got a 2002 W210 E-Class with the automatic air-conditioning. The air con was not working as it should and last week the EC light on the control panel would not switch off, checked manual and suggested to get air con re-gassed. Went to local Kwik-fit and they have done the job...
  12. D

    engine not reving past 3000revs on W210 E 320 cdi

    Thanks to all for suggestions. Car worked great this morning no problems but after a few hours started to play up again. Managed to get it booked in straight away for diagnostics, cleared all old codes and faults and took car for a run and it ran like a brand new car loads of power,hooked it...
  13. D

    engine not reving past 3000revs on W210 E 320 cdi

    Cheers john, had similar problem before on a Vectra DTi and it was the MAF sensor but the engine management light came on thats why it was throwing me a bit as I dont have any lights or malfunction warnings this time but symptoms are identical. Will try new MAF sensor and let you know.
  14. D

    engine not reving past 3000revs on W210 E 320 cdi

    Is this an easy fix and is it expensive. When car is switched of you can push the wastegate linkage and it springs back ok. I did notice though when the car doesn't rev passed 3000 and you switch engine off you can hear a strange noise from that area for a few seconds but when the car is working...
  15. D

    engine not reving past 3000revs on W210 E 320 cdi

    Went out in my today W210 E320 CDI no problem, entered dual carrageway floored it but it just gradually increased in speed (no kickdown) max 3000revs. There was no lights on in dash or malfunction, pulled over to investigate and noticed when reving engine from under bonnet the waste gate linkage...
  16. D

    Engine

    I thought of that too but i should have said it increases with engine revs but as you turn on a long bend or at a junction it immediately goes away and comes back the minute you straighten the car. Also when cruising on the motorway you can't hear it only when you accelerate. If you accelerate...
  17. D

    Engine

    Hi, I have a 320cdi 2001 model. I have a tappety noise coming from the engine which can be heard from inside the car but hardly noticeable from the outside when driving but no noise on idle. When you increase speed the noise gets faster but when you turn the noise goes away. It is due a service...
  18. D

    comand 2.0

    the guy I bought the car from told me it was the nokia 6310i that fitted the cradle, went on ebay bought the phone. Have checked model No of cradle which is a2038200651 and its for a nokia 5110,5130,6110,6130,6150. Does anyone know if there is a bluetooth module to fit this cradle or would it be...
  19. D

    injector

    got car back from garage this morning. They repaired seal on No2 injector. problem with starting issue was a seal on the fuel pump. Had pump removed and completely refurbished car now runs perfect and starts straight away. thanks for suggestions
  20. D

    comand 2.0

    Hi, (1) I have an 2002 E-class which has a comand 2.0 head unit. It has a phone cradle fitted in the arm rest compartment which takes a nokia 6310i. When i fit the phone it either says no phone connected or phone initializing. Does anyone know how to connect the phone even when it says phone...
Back
Top Bottom