Search results

What else would it be for??? :dk:

Anyone? Come on, somebody must know how this is done!!!

It's a long shot but if you look under the spare wheel in the boot and remove all the tools and things, there should be a rubber grommit there, i think it must be a water drain of some description in the coupe, i used it to wire in my front parking sensors. No reason why you couldn't cable tie...

It's so I can fit a towbar btw, so if anyone has any advice on that as well? thank you.

Anyone know the procedure for removing a rear bumper from a '56 C Class Coupe (W203). Any help?

I found this one... MB Carsoft 7.4 Multiplexer could this work? although i'm quite good with electronics/laptops etc... I need all the help I can get with figuring this stuff out!!! thanks.

Hi there, do you think the carsoft kit would do the coding then, my car is on a 56 plate. Are all kits like this worth avoiding then? I assumed other than a STAR kit they all pretty much did the basic functions! thanks again.

Anyone think this could work? I'm wanting to do some coding for mirrors and lights etc... but I'm sure STAR is the only way. Any help? Car Diagnostic Tools + Tuning + Remapping Mercedes 38 PIN + BMW 20 Pin + VAG OBD | eBay

Mine is the same, it only blows cold on 'lo' setting if I set temp to 17 or above on either driver or passenger side it blows hot air, not warm, but red hot air even with a/c switched on... It may be because I swapped my thermatic unit to a thermotronic one, but even after replacing the unit...

http://www.mbclub.co.uk/forums/general-discussion/106341-fiscon-bluetooth-fitted.html This is the thread from when I had a Fiscon system fitted, great set-up and very reliable... I know Derby is a good distance from you but if your ever in the area it only takes a couple of hours to fit...

Press and hold CDC button, should display "Aux Input Active" It does on mine anyway!

I had the same problem, mine was under warrenty though so having the switch replaced didn't cost me a penny!

Oh good, at least I know it can be done... How much if you dont mind me asking, and did you go to mercedes for fitting or can it be done by a local specialist?

Does anyone know if it's possible to fit a towbar to a c220 cdi coupe? I'm only going to be towing a small box trailer so I dont think i'm going to need autobox cooling or anything else but i'm just not sure if a towbar can be fitted due to the location of the spare wheel... any help?

I have a Fiscon Bluetooth system fitted... uses all the functions the car is fitted with i.e steering wheel buttons, instrument cluster screen and original audio system, plus the added advantage of bluetooth, so no replacement armrest needed and also compatible with wireless music streaming, my...

Hi guys, I've done this myself and it's really very easy... I wired in door lights as opposed to footwell lights but in principal it's the same wiring pins in the door control unit that you need to take the feed from, you just need to position the light fitting somewhere in the footwell for best...

Does this mean you have independant left and right controls of air distribution from the climate unit?

Cheers Guys, I think the look of the unit is a lot better than standard (That's pretty much the sole reason for retrofitting it!) I just thought maybe the REST function could be programmed on the unit itself using some of the on board diagnostics, either that or my car requires some extra bits...

Any help? Thanks.

Hi all, Yesterday I bought a Thermotronic unit from R2D2 from this forum for a very reasonable price if I say so myself! It arrived this morning, had it fitted in half an hour, began the normalising function and after about 1 minute the unit worked perfectly.... A couple of things regarding...