Search results

well hi all the last few days have been a nightmare i was fixing the back lights when i was finished tried it put key in the slot and o my god the srs light was on !!!!!!!!!!!!!!!! so after much work on google checked out the seat pad then the wires all ok so after 2 days of thinking i would...

hi i find myself having to say that the car has been a bit of a pain over the last few months but i was always able to repair her myself, she broke her serpentine belt (again)when the wife was out with her so the man with the green flag had to bring her and the car home after the fix on the new...

hi all but the service was done wrong the torque is ( alloy wheels 85 lb ft ) if you over tighten the bolt you will stretch it and it will break as it has been weekend no ifs or buts

hi all well i have had this merc for nearly 2 years and about 7 months ago it started playing up bad starting looked on this site and was relieved to find the problem (o rings ) ,well some weeks back the fan belt let go the small idle pulley broke up so had to fix a.s.a.p so new belt and pulley...

hi all 3 years now with a Mercedes yesterday the alternator belt snapped how do i remove the idler as it`s split in half and i have a new one coming with the belt me and the wife love to drive this relaxing car thanks in advance :dk: arch

tick over hi had this problem it was the inlet throttle flap needed ajusting and then all was well that car was a 1996 c200 petrol cheers arch

hi guys just had time to look at the sepper motors in the manual (nightmare ) hears the thing has anyone got pic`s of the thing when it`s out !! fingers crossed cheers up2u

:dk:hi guys been quite a nice summer so far the cars been great cool in the sunny days and warm in the cold nights !! but i now have a problem from inside the dash of the car when i turn the key to start her up from behind the dash comes this tick tick for about 16 to 20 seconds and then stops...

paint hi guys the paint is just a tool but you need the skills to use it , if you go to a good paint supplier he or she will mix it for you, now that is a real skill matching the old paints chears up2u

bad start hi i had the same thing last year after service and filter change it was the o ring seals on the top of the fuel filter changed them and all is well try this first as cheap as chips to find out yours up2u!!:bannana: PS put some clean vaseline on the O rings

turbo hi the turbo will be fine fit the pipe and go for a run you will see the turbo was still being fed with oil so it will be allright cheers up2u:thumb:

hi this is time to put my hands up the rattle on the car was the hand brake hitting the prop shaft and not the center bearing so will put the bearing on the shelf for a later date !! this was really funny because it sounded like a drying bearing with a badly pitted bearing track so i am asking...

hi just a wee note if to little diesel you will damage the diesel pump as no lube ok up2u

hi just a wee update the noise is the prop shaft center bearing just need to find one now at a best price some where local or even ebay cheers up2u:)

hi guys just this week used a new tool to change the auto gearbox oil and filter it is a auto-diy garage in the glasgow area ! the web address is Self Service Garage - Glasgow | Auto-Diy the email = [email protected] this is a great facility i hired one of the the two post lift for £21 an...

hi guys going to change the aft in my w203 2001 270cdi how much oil does it hold cheers up2u

hi still hear this rattle i have well the mer could it be the centre bearing do you think thats for the prop :dk: cheers up2u

hi guys my car has a problem need help to diagnose what it is ( as i drive off there is a rattle starts from the gearbox area is not the engine as the rattle only happens when ths car is moving when i excelarate the noise is constant and if i lift my of the power it`s still there the matalic...

my ride hi this is my first mb 1995 w202 c200 auto 121k she was cheep as chips and had things to do brakes , oils + filters , throtlle cable , tyres all round as i was told the rust worm is on the march on the wings and the body but it is reliable starts first time every time and really...

pressuer hi there is a valve on the fuel rail at the front of the engine looks like a tyre valve ! first open the fuel tank filler cap, then remove the black valve cap then with a small flat screw driver and a rag release the pressure !! if no pressure it`s the pump or pump relay or fuse...