Search results

hello, thought id put my merc on ebay so heres the link 1999 MERCEDES E300 TD Eclass E-class AMG 18 PI Lowering kit | eBay thanks ian

hello, car keeps going into limp mode and gettin on my **** now, read the codes and the EGR keeps coming up, any know the way to blank it off? thought i done i when i mapped the chips but i must have not.

Hello just a quick one. Does the sump run a gasket or is a sump sealer used? Thanks ian

OK ill start at the begining, I bent the under side metal that the rad sits on, took rad out repaired that and pulled the under bracket as straight as i could, Now for the strange part, car starts to run lumpy and stalls. Restart car and drive home and it wont boost. Maybe 0.1bar, car...

on my 99 E300td, does any one know if the turbo runs a wastegate or variable vane turbo? as it runs on vac not poz pressure but where the arm goes into the turbo looks like a wastegate. Or if some one got a pic of the exhaust side of the turbo that would clear it up. many thanks ian

As it says, i have pressed the T/C button and that lets the wheels spin a small amount but still cuts in, any way to tun it off???? with the Stage2 chip running, all i see is the light flashing at me. and cant let the car dance

Hello, feel like a wolly asking this as some of the buttons round the dash dont seem to do much, on the left are + - 0 and on the right H M R Ok h and m are fo adusting the clock, and think the 0 is to reset the mileometer but the others im lost, thought a car like these...

Hello, im having a problem when chipping my merc, she a 99 plate, done all the maps for a stage2 style map, put sockets in for the chips so no soldering to swap chips over, put chips i done it and the glow plug light doesnt come on and wont try to start, cant find why as only changed the...

Hello, as some of u know that i have had major rattly sound coming from the engine, well found part of the slide rail had snapped off, so thought id change it, started taking it apart and check the timing, put the bolt through the inlet cam, both the little dots lined up but the bottom pulley...

IF some one else has fitted a new chain tensioner and not pre filled it with oil, would the chain not tension properly? and if the guides wasnt changed, would welding/adding some thing onto the end of the tensioner help it push the tensioner out to tighten the chain??

Hello, Ok have an update on the loud sounding engine in my car, lissened to another e300td and mine is loud. It is like the exhaust hydraulic buckets arent getting enough oil pressure. Reading some where that there are link pipes on top the head linking the inlet buckets to the...

Hello again, E300td lift pump, any idea of cost of a new one? or they rebuild able unit? Pulled the pipe off between the lift pump and the main pump and ran car and not alot of derv came out. So taking that aint working right Almost got my hands on the chip flashing hardware and...

Hello Ok my expencive Egt gauge in today as my other one i wasnt sure if it was reading right or not, So pulled the one from my race car, still in the same place straight after the turbo and only reading 350-370C that would explain why the engine is so loud on idle and up throught the...

Hello, does any one know of any software that can read and edit the stock bosch ecu? or do a chip that can be remaped with out having to remove the chip from the ecu then map it on a machine??? Any ideas?

Hello, had look over the forum but cant seem to find too much. Are there any tuning boxs for the e300td ? Or a way of controling the fueling? Going to Decat, and KnN panel filter, turn the boost up. Got a EGT gauge just after the turbo so can set the fuel to boost with out any...