Search results

:)Hi all Thanks again for all you help have changed all seals and pipes the seal in the pre filter i think was the problem burt changed everything anyway

Sorry link got messed up see below http://www.mbclub.co.uk/forums/engine/138263-e300-turbodiesel-fuel-run-back.html

Hi all Still trying to solve the mystery of the air intake in the fuel line I did come across this thread that seems to be the same problems on the E300 as my c250 can anyone tell me if the two have the same delivery as it seems that way to me...

Hi Dieselman Long time no speak thanks for quick response can you tell me where the tank pick up point is?

Thanks A11r same thing on mine changed it last year.

Hi I need to change the top front hear side arm on my c250 I can get to one side of the arm but the other side is under a large black electrical box. Is it possible/easy to remove or is it another special tool??

Hi My c250 is playing up again!!! has started not to start on the button and when eventually I get it started (about an hour) you can see air bubbles in the fuel lines. The tank is half full and when I filled it up the air bubbles disappear and it starts fine. I have checked to see any leeks...

Hi Guys Good friend of mine has just purchased or is about to a 2003 SL600 and I have a couple of questions I would like to as the club. Who would you recomend to service the car besides main dealer, we are based in north London. I Know they are expensive to run and that the air suspension can...

Jus a word of warning try not to disturb or remove the delivery valve and the cylinder it's housed in. Also be careful you don't loose the spring that seats under the delivery valve. I had my car of the road for over three weeks any way follow this link if you do have any problems...

:bannana:HI All YES!!!! took out the plunger barrel but could not see the pin on the inside of the pump so gave it a little tap on the outside of the pump and it showed itself so put the plunger barrel back in and hey presto. AC thank you very much for the advice when I'm next in the area...

Hi all Have taken plate of side of pump and can't see any pins out of place. have measured the plunger barrel from its top to the top of the pump no 5 = 19.27mm and 4 = 19.56mm the plungers looks sable in the housing and I am reluctant to take it out. I think I have attached a couple of...

thanks for the quick the response. will give it a try and let you know.

Hi Alex Many thanks for the reply very detailed and a little scary for me to undertake but will give it a go. Is the access plate accessible if I remove the black shut off valve on the side of the pump? And how do I know I have aligned the plunger barrel correctly? Again many thanks.

Hi NC I have the exploded view of the delivery valve and an explanation with diagrams showing the procedure (it's from Parrot of Doom) in that he says he was told not to take 7g or 7k out but he dose take one out and has no problem. I unfortunately have taken all 5 out 4 times now and it is only...

Hi MC PS have also changed Valve housing, small cylinder and plunger valve.

Hi Nc Good way to check should have read before I took injector out. Any way have made up tool to take the injector out and checked to see if it was blocked and found it was in good condition, swapped injectors only to find that the black smoke did not move with the injector so back to the...

Hi Dieselman I will give that a go. just trying to locate a 22mm socket to take it out. The car has done 105K now so seeing I have the car apart maybe a good idea to change all the injectors looks like you can get a set for around £80.00. Have the washers already. Just want to know before I...

:bannana:Thanks for that but think I found the problem isolated each pressure valve and found that one of them was not working smoked stopped straight away just need to make sure if its the injector or the pressure valve on the pump so will change round injectors to check. But thanks guys...

Thanks for that link reading through he took out the long cylinder under the small one i wouldn't have thought that would be a good idea. I have spoken to some pump specialist and they contradict themselves also and they say bring the car or pump in - no good when its chucking that much smoke...

Hi Silversaloon What do you mean by (iirc)? Some people do say that removing the small cylinder a centre valve is not what you want to be doing and if you do you need to put it back the same way (but there are no markings or special grooves that I can see) and when you ask mercedes parts they...