Search results

Had it stripped down today and followed the brown wire as far back as i could get to before it goes beyond reach and still no joy, for the time being ive just put a patch wire over to enable it to work but still getting the error. I know it all runs off a canbus system could it be a fault...

When bridged over it works fine, except I still get the bulb error. So would I just need to trace the defective wire to where it connects and run a new to the n/s bulb?

Cheers for that, already tried cleaning the contact up but no joy, the only problem with running a wire over is thati still get the error msg on the dash and would like tp try and eliminate the fault.

Hi Guys, just looking for a bit of help with the above. Up until recently all was working fine but overnight the bulb error came on the dash - simples - change the bulb as it was not lighting up - but this did not resolve the issue. So i changed the bulb that was working to the side that is...

issues solved - no warning signs at last. unpluged all of the new sensors and refitted but same issue, as a stab in the dark replaced the new coolant sensor with the old and it eliminated the problem.

Hi all, had the above msg on the car since i bought it, so decided to replace the washer bottle sensor and the coolant level sensor to eliminate the issue as im aware that they work in series - but ive still got the same problem showing on the dash - any ideas as to where/what to try next...

problem solved via replacing roll bar bushes and drop links - thanks to all for the advice

Where abouts is this section of the wiring loom???? I dont want to start pulling plugs out that are not relevant - any pictures would be ideal :-)

Sorry for delays, things cropped up and they came first - im not sure what system has been used to check the fault, is star diag a main dealer system?? sorry not near Essex, up in South Yorkshire

Hi Guys, looking for a bit of info for a neighbour, he was on the motorway the other day and the car lost most of its power and went into limp mode with the accompanying waring light on the dash - he has taken it to be checked and it it spat out P200B Bank 2/5 hot film mass air flow error...

Thanks for all the above, I will get it on stands this weekend and have a nosey without the wheels to see what the eye can see.

Hi Guys Hoping for a shove in the right direction - When i bought the car (97' E300TD) in September it had a minor knock from the front end everytime i went over a hump or similar, overtime it sounds like it has got worse. It passed its MOT in December after replacing a track rod end...

28 with a '97 E300 TD Avantgarde my first Benz

Big Hello to everybody!! I purchased my E300TD Avantgarde back in September 2011, been lurking around on here since January this year and got to say it is a wealth of knowledge, hints and tips. I have already used the posts on here to restore my headlamps, fix minor issues and generally get to...