Search results

  1. S

    HOWTO: Diesel delivery valve leaks

    Help Hi Great write up thanks. This is exactly what I tried to do on my 92 reg e300d non turbo. I did exactly as you described, but encountered 2 problems,,, 1 my spline socket would not fit down far enough onto the valve, it doesn't go down enough to have the spline bit onto the...
  2. S

    30% Off Lubricants and Parts - Cheapest Castrol in The Uk?!?!?!

    It is hard to get up to 30 posts to enable posts in the classifieds etc! Why such a high number, 30?
  3. S

    Hull

    And also, what sort of price would I pay for someone to change the o rings on my merc 300d?
  4. S

    Hull

    Or diesel injection specialist?
  5. S

    Hull

    Or know of good merc specialist?
  6. S

    Fuel pump w124 diesel

    Thanks Thanks for the advice guys!
  7. S

    Fuel pump w124 diesel

    Hi Hi Yes the splines are in perfect condition, the tool doesn't quite go down over the valve enough to reach the spline bit,, it's like part of the valve is too wide for the tool,, I have double checked the tool is the correct one laser tools code5471, so totally stuck! Was advised to...
  8. S

    MBClub UK Android Mobile APP out now

    Nice Sweet
  9. S

    Hull

    Any one in Hull fancy doing a small job on my w124 diesel for a bit of cash and some beers? Replacing the rubber o rings on my fuel pump valves, and one of my injectors I think has some dirt in it as it started knocking loudly after my last attempt to remove the injection pump valves, all...
  10. S

    30% Off Lubricants and Parts - Cheapest Castrol in The Uk?!?!?!

    Bargain Which is the best oil to use for a 92 w124 3.0diesel non turbo?
  11. S

    Fuel pump w124 diesel

    Hi Anyone used laser tool 5471 33point splice tool before to remove the valves from the top of the injection pump on a 92 w124 3.0d ? The tool won't fit down the valve far enough, it's like it isn't wide enough to get over part of the valve. Was advised on here that I should tap it down...
  12. S

    Please somebody help / respond Injection pump

    Hi Thanks for the reply. So undo the ring that retains the valve, by the t-30 torx bit, and then use the ringtone undo it slightly? And then put the socket over the valve and tap with a hammer? Definately? I really stuck now, as I gave in, put all the pipes back on, and airbox, started it up...
  13. S

    Please somebody help / respond Injection pump

    Hi I'm really stuck trying to remove the valves from the op of my injection pump to replace the rubber O rings and copper washers. 1992 300D K650EYL Vin. WBD1241902F241396 Engine no. 60391222059433 I have bought the 33pt spline x56mm long socket (laser tools 5471) that is...
  14. S

    W124 3 litre diesel O ring / copper washer replacement on fuel pump

    Hi I am attempting to change the rubber O rings and copper washers on my 92 merc 3 litre diesel non turbo. Was after some advice re access, as I thought I would need to remove the inlet manifold to access the fuel pump. I started the work today and after removing the air box etc I found...
  15. S

    W124 300TE 3.0 diesel non turbo

    Hi I need to change o rings on my fuel pump on my w124 diesel, and I've found some good instructions and orders the 33 tooth spline tool etc. I need to remove the intake manifold to do this, any tips and advice on how I should do this, it looks a bit complicated, I'm not a mechanic, but...
  16. S

    New member, help?

    Hi New to the forum, lots of great info on here! Just bought a w124 300TE diesel estate. 3.0 non turbo. 1992. It says 300TE on logbook, but 300TD on back of car, but it's a non turbo diesel. I believe the engine etc is original, as I went to merc to buy some o rings and used chassis...
Back
Top Bottom