Search results

Bit of an update have another car now so pressure off to fix this, swapped the lighting module and didn't make any difference had a computer hooked up but can't read the sams : ( - what has happened is I took out the front sam in the engine bay to get the part number, and by uplugging all the...

After much googleing I found a YouTube video of a guy swapping out the light switch (from where im sure noise is coming from), thought worth watching to see how it comes out, and thus whats behind, well turns out the light switch is an all in one including the fuse board\dash wiring harness and...

Thank you - I'm off this week and will try and see whats lurking behind the panel, what I have also noticed is when the windows stop working - i can still use the inferred on the door handle to power all 4 up and down

https://www.amazon.co.uk/gp/product/B074KY6XG1/?tag=amazon0e9db-21 Is the one

Really old tread but have the same issue - 1 in a 1000000 was it fixed

Hi All, CLK320 Cab 1999 Facelift Have the strangest issue, been happening for year or so, now getting worse, the windows stop working or work intermittently at about the same time but not always i hear a clicking sound from what i think is the right hand side vent area behind the dash or...

I bought a cheap £60 one off amazom you stick it to the front screen, then has a little box and using a line in - into the aux - it works well you do get the odd drop out in certain places but on the whole works fine, I think the key is to ensure the copper part that attaches to the A piller...

Sorry your still having issues -Where about are you Leicester? I live in Rugby just off J2 of the M6 and we can test a known working oem maf I have as a spare? I assume we would know instantly if it fixes the issue? no re-seting of the ecu needed, Mines a facelfted 1999 I assume the same,

Hmmm thats a shame - the leads are they 100% correct in terms of fitment on the a and b on the coil packs and are they on the coil packs fully, they are the same ones I bought in a clear bag, I know when I fitted them my brother went over them again and a good few weren't fully mounted on the...

Could be water ingress not sure, I'm sure the leads are classed as routine service items but I guess due to the cost no one replaces them mine came from GSF about £80 for a set I think, the Bosch ones are a lot more, as someone else pointed out could also be a vacuum leak, I know when mine was...

Ive only skim read this thread but mine went from having a slight engine shake to running on what felt like 4 cylinders shaking itself apart and it was the HT leads failing, never had it happen on a car before now but believe these engines are "really really" sensitive to them all 12 !!! -...

I had the same on mine - its a conv and the roof didn't close correctly and hence disabled the boot release, it took about 2 hours of spraying wd40 and jigglying the key in the lock and it finally opened, From memory the key is to keep going not to force it, but I think you push the lock so it...

Thank you will do - I've a week off mid July so I'll do it then, and see what happens hopefully cheap fix!!

Thank you WG M-B, would it just be the outer 2 to start with please ? - I know they are dirt cheap,

Hi All, Been gradually getting worse its a high pitch squeak squeak that appears to come from the from passenger side, notice it at low speeds but have heard it at higher speeds too the same length and pitch, sound like brakes but all 4 disks, pads are new and it was doing it before, lower ball...

If it helps I have a W208 Conv 1999 M112 last couple of years, had the brake light switch fail and also it developed a brutal misfire which was fixed by replacing all the HT leads (12) also did the plugs at the same time, in the past its also had the CPS replaced, and the transmission electrical...

All done (other side), what a lot of the treads on this fail to say is all the breather pipes will be rock hard and just split so best to replace the lot cost about £40 including all interconnects, I also replaced the throttle body seal (rock hard) and the filler neck seal, Also its worth test...

Hi All, Thought I'd do an update we decided to do it yesterday and did the passenger side, plan was to clean the old ones but I also wanted to see the state of the value train, Value train was fine but the cam covers were caked with oil, so used the new one as these had at some point being...

I agree as above - are the reverse lights in the boot lid? (I can't remember) if they are check the LED brake light is working I'd suspect not and that would explain the light warning if its an auto on start-up, I had the same and the earth wire in the boot had broken, its located in the flex...

Thanks everyone, was having a look at my spare set and can't work out how to remove the breathers - I took the 2 bolts out I assume its just the old sealant holding it together - the metal looks thin and I think a flat blade screwdriver will just damage the surfaces, is it a case of tugging and...